Re: FN-FORUM Access via router

date posted 27th January 2003 15:38

I am sorry... I live in that white building on Buckingham Palace Road.
Couldn't be bothered to wire everything up.

However... the access point actually goes up to 180 meters, but after 2-3
walls and 10 meters it is very slow sometimes and that's based on 22mbps
connection

Stephan


----- Original Message -----
From: "Jan Bruvoll" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Monday, January 27, 2003 2:52 PM
Subject: Re: FN-FORUM Access via router


> Hiya,
>
> hmm... given that the range of those things should be up in the hundreds
> of meters, I think I envy you your house ;-)
>
> Regards
> Jan
>
> On Mon, 2003-01-27 at 13:50, Stephan Koern wrote:
> > Hi
> >
> > I don't use this particular model, but I use VNC over a wireless
network
> > and it works fine. I have an U.S Robotics Access Point connected to a
hub(A
> > friend of mine has an Acces point connected to a router) and a D-Link
Card
> > in my laptop.
> > The longer the distance to the access point the slower the data
transfer. I
> > had to reposition my Access point to a more central location in my home.
It
> > was also a nightmare to install the hardware (Mainly manaufactor
related,
> > bat documented), but there after I had no problems. I am glad I did it.
> >
> > I hope thats helps....
> >
> > Stephan
> >
> > www.koern.com
> >
> >
> > ----- Original Message -----
> > From: "Paul J White" [EMAIL REMOVED]
> > To: [EMAIL REMOVED]
> > Sent: Monday, January 27, 2003 12:54 PM
> > Subject: Re: FN-FORUM Access via router
> >
> >
> > > > I have been considering buying a Linksys EtherFast Wireless
Cable/DSL
> > > Router BEFW11S4 from Amazon.
> > > > If I do this will I be able to access each of my PC's individually
using
> > > VNC
> > > > from the Internet by setting up some sort of port mapping on the
router
> > ?
> > > >
> > > I'm not sure Dennis, but I'm in the middle of networking the house and
> > have
> > > found the newsgroup at blueyonder.users.self-help.networking to be
full of
> > > knowledgeable and helpful folks.
> > >
> > > HTH, Paul.
> > >
> > > ========
> > > Freelancers and Freelance Jobs: http://www.freelancers.net
> > >
> > > Advertise with Freelancers.net http://www.freelancers.net/advert.php
> > >
> > > To unsubscribe please email:
> > > [EMAIL REMOVED]
> > >
> > > If you have difficulties unsubscribing please email:
> > [EMAIL REMOVED]
> > >
> >
> >
> > ========
> > Freelancers and Freelance Jobs: http://www.freelancers.net
> >
> > Advertise with Freelancers.net http://www.freelancers.net/advert.php
> >
> > To unsubscribe please email:
> > [EMAIL REMOVED]
> >
> > If you have difficulties unsubscribing please email:
[EMAIL REMOVED]
>
> ========
> Freelancers and Freelance Jobs: http://www.freelancers.net
>
> Advertise with Freelancers.net http://www.freelancers.net/advert.php
>
> To unsubscribe please email:
> [EMAIL REMOVED]
>
> If you have difficulties unsubscribing please email:
[EMAIL REMOVED]
>