Freelancers Forum Messages on Sunday August 3rd 2003
RE: FN-FORUM: SSL and certificates
date posted 3rd August 2003 23:54
> ========================
> Saturday 2nd August 2003 14:41:26
> Re: FN-FORUM: SSL and certificates - Manjit Singh
> [EMAIL REMOVED]
>
> Amazon does not appear to use CA's, no detering messages
> t...
Re: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 21:45
Actually, I didn't say Dreamweaver crashed my machine, and all I said was
that for me DW was a bit top heavy.
Someone else commented on it crashing their PC.
It didn't do that to me, just was a bit...
Re: FN-FORUM Brighton advice
date posted 3rd August 2003 19:23
> Having been in London for the last five years ... some of that time as a
> freelancer, I have finally decided to make the move to Brighton and try
> and find full time design work again ... none of...
RE: FN-FORUM: Google Dance
date posted 3rd August 2003 19:20
Google isn't dancing! If your listings have been updated, its because since
google has updated their algorythims this month, they now appear to be
continually spidering sites (i think its just freshb...
FN-FORUM: Google Dance
date posted 3rd August 2003 19:08
Looks like the google dance has started today. No mention from SEOchat but
my listing has been updated.
Regards
Sam Morgan
WIREDEYES
Internet Consultancy
t : 0845 644 6568 (Local Rate)
f : 0871...
RE: FN-FORUM: 10% Discount on Topstyle 3.10 was Dreamweaver MX..
date posted 3rd August 2003 18:51
> Tony Crockford wrote:
> > Go to the above and use coupon BOLD-G4CP-ISH
> >
> > should give you a 10% discount (half my commission)
>
> Aaarrrhhh ok ok I give in!! I'll buy the damn thing goddammit!...
Re: FN-FORUM: Hosted CMS
date posted 3rd August 2003 18:44
If you have cpanel and fantasico is comes with preinstallers for the likes
of phpnuke, postnuke , xoops etc
----- Original Message -----
From: Paul Civati [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: S...
Re: FN-FORUM: 10% Discount on Topstyle 3.10 was Dreamweaver MX..
date posted 3rd August 2003 18:31
Tony Crockford wrote:
> Go to the above and use coupon BOLD-G4CP-ISH
>
> should give you a 10% discount (half my commission)
Aaarrrhhh ok ok I give in!! I'll buy the damn thing goddammit!!! :)
Chri...
RE: FN-FORUM: logo creation
date posted 3rd August 2003 18:29
I asked what was used in that thread not how to use google!
but hey thanks any Marion that was really useful to know and helpful
>-----Original Message-----
>From: [EMAIL REMOVED] [EMAIL REMOVED]...
RE: FN-FORUM: logo creation
date posted 3rd August 2003 18:26
Just what I needed, thank you Hutch
http://www.google.com/search?sourceid=navclient&q=Logo+Creator
http://www.thelogocreator.com/
Andrew
>-----Original Message-----
>From: [EMAIL REMOVED] [EMAIL RE...
FN-FORUM: 10% Discount on Topstyle 3.10 was Dreamweaver MX..
date posted 3rd August 2003 18:23
> Crap wordwrap!
>
> ffiliate=1
> 6516>
>
> or:
>
> http://tinyurl.com/iwlm
Go to the above and use coupon BOLD-G4CP-ISH
should give you a 10% discount (half my commission)
Chee...
RE: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 18:11
Crap wordwrap!
or:
http://tinyurl.com/iwlm
cheers.
Tony...
RE: FN-FORUM: logo creation
date posted 3rd August 2003 18:08
M$ Publisher has a logo wizard.
it's on a par with that new media name generator, but you might get
something you can start from....
HTH
Tony...
RE: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 18:02
> Tony Crockford wrote:
> > Please have a look at topstyle Pro 3.0 before you get to
> set on html-kit
> > (I had a lot of resource problems with html-kit!)
> >
> > It'll do everything you ask and lo...
Re: FN-FORUM: logo creation
date posted 3rd August 2003 17:57
> Was it software that created this master piece of a logo and is it worth having
> a look at it and giving it a spin?
Er... Google with the words logo and creator and you get
http://www.thelogocreat...
Re: FN-FORUM: logo creation
date posted 3rd August 2003 17:56
It was called, amazingly enough, Logo Creator.
Hutch
----- Original Message -----
From: "Dan Cook" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Sunday, August 03, 2003 6:16 PM
Subject: Re: FN-FORUM: lo...
RE: FN-FORUM: logo creation
date posted 3rd August 2003 17:55
Yeah, that'll be the one... or Freehand ;)
Oh, you failed to mention 'talent'!
Kai
monoliff
internet design and production
www.monoliff.com
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL...
Re: FN-FORUM: logo creation
date posted 3rd August 2003 17:50
I think it's called Illustrator with the 'hard work' plugin.
----- Original Message -----
From: "Business A2Z" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Sunday, August 03, 2003 6:09 PM
Subject: RE:...
RE: FN-FORUM: .ai files
date posted 3rd August 2003 17:47
If you haven't got sorted Lindsey then send them to me. Haven't got a
Mac but it won't really matter.
Cheers
Kai
monoliff
internet design and production
www.monoliff.com
-----Original Message-----...
RE: FN-FORUM: logo creation
date posted 3rd August 2003 17:43
to prevent further head shaking, I just want the name of the software or plugin?
Andrew
>-----Original Message-----
>From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of
>Business A2Z
>Sent: 03 August 20...
RE: FN-FORUM: logo creation
date posted 3rd August 2003 17:25
Why on earth would graphic artists rant about this? If you look at
BBC3's logo (as previously discussed) I bet that took 10 seconds to
create. It's the final result that counts and I suppose if you'r...
Re: FN-FORUM: logo creation
date posted 3rd August 2003 17:20
*shakes head in despair*
----- Original Message -----
From: "Business A2Z" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Sunday, August 03, 2003 5:31 PM
Subject: FN-FORUM: logo creation
>
> someone a...
Re: FN-FORUM: .ai files
date posted 3rd August 2003 17:06
mail em through to me lindsey, i can sort it for ya!
luke
[EMAIL REMOVED]
On Sunday, August 3, 2003, at 05:03 PM, Lindsey Hill wrote:
>
> I'm doing an urgent job for a client and i have some .ai f...
FN-FORUM: logo creation
date posted 3rd August 2003 17:05
someone a while back mentioned creating a logo in 10 minutes which caused a
little rant from the graphic artists!
Was it software that created this master piece of a logo and is it worth having
a loo...
RE: FN-FORUM: .ai files
date posted 3rd August 2003 16:53
I might be able to do it on a PC if thats any help?
Jamie Lewis
Low Cost Web Hosting - http://www.eyota-web-hosting.co.uk
Bespoke Web & IT Solutions - http://www.eyota.co.uk
-----Original Message-...
FN-FORUM: .ai files
date posted 3rd August 2003 16:37
I'm doing an urgent job for a client and i have some .ai files that i
can't open in freehand and I don't have illustrator. Most will open but
thee are 2 that are 5mb and freehand opens them blank....
Re: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 15:23
Tony Crockford wrote:
> Please have a look at topstyle Pro 3.0 before you get to set on html-kit
> (I had a lot of resource problems with html-kit!)
>
> It'll do everything you ask and loads more.
I...
RE: FN-FORUM: Web Server Log Files
date posted 3rd August 2003 14:25
Cheers Paul.
I was going down the lines of 'website server log file'
Jamie Lewis
Low Cost Web Hosting - http://www.eyota-web-hosting.co.uk
Bespoke Web & IT Solutions - http://www.eyota.co.uk
----...
Re: FN-FORUM: Web Server Log Files
date posted 3rd August 2003 14:21
Jamie Lewis [EMAIL REMOVED] wrote:
> Can any one point me in the direction of a guide to understanding a w3c=
> extended log file.
Google: W3C log file format
-Paul-...
FN-FORUM: Web Server Log Files
date posted 3rd August 2003 14:08
Hello.
Can any one point me in the direction of a guide to understanding a w3c
extended log file.
I'm writing an ASP app' & I want to be able to extract some bits of info
direct from the log files....
Re: FN-FORUM: Hosted CMS
date posted 3rd August 2003 13:56
Business A2Z [EMAIL REMOVED] wrote:
> Paul can you just clarify are you referring to just hosting or the full=
> solution for a web site?
I was really just thinking of hosting with installed CMS ap...
Re: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 11:36
On Sunday, August 3, 2003, at 10:11 AM, Joe Pritchard wrote:
> And soem of the pages it creates 'from the box' appear to be quite
> bloated,
> but again, that's my opinion...:-)
yeah, dreamweavers...
Re: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 11:34
In your defence it actually says 'Intel Pentium II processor or equivalent
300+ MHz' in the minimum system requirements. But past experience has taught
me that minimum specs represent a 'my god we act...
RE: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 10:40
I think he is making the point that you are slagging off and blaming a =
piece
of software for being too slow and crashing when you should be blaming =
your
own machine.
Regards=20
=20
Sam Morgan=20...
Re: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 10:16
Well,
As my abacus runs all the other stuff I need to work, and my Linux box looks
after the server side of things - Apache, mySQL, Postgres - why should I
spend money and time upgrading to run one a...
RE: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 10:08
ROTFL, good call.
Regards=20
=20
Sam Morgan=20
=20
WIREDEYES
Internet Consultancy=20
t : 0845 644 6568 (Local Rate)=20
f : 0871 433 2278 (10p per min)=20
e : [EMAIL REMOVED]
w : http://www.wiredeyes....
Re: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 10:03
Yea, it runs really badly on my abacus too. Maybe I should upgrade to that
new-fangled difference engine I've heard so much about.
Hutch
.
----- Original Message -----
From: "Joe Pritchard" [EMAIL RE...
Re: FN-FORUM: Dreamweaver MX..
date posted 3rd August 2003 09:46
Hi Dan
>
> WHAT!!!?? As yet there is nothing that can come even remotely close to
> Dreamweaver (fact). As for crashing, it has never happened to me once -
> maybe it's your PC .
>
(fact)???? Surel...
RE: FN-FORUM: Hosted CMS
date posted 3rd August 2003 08:20
Paul can you just clarify are you referring to just hosting or the full solution
for a web site?
Andrew
>
>Folks,
>
>I've been thinking for a while that I should put together a hosted CMS
>solution,...
FN-FORUM: Hosted CMS
date posted 3rd August 2003 00:55
Folks,
I've been thinking for a while that I should put together a hosted CMS
solution, and there are lots of free packages around that like to think
they fall under this category (eg. Drupal).
Do...
|
|