Freelancers Forum Messages on Friday August 8th 2003
Re: FN-FORUM: Flash browser detection and autorun
date posted 8th August 2003 22:58
All you need to do is create an autrun.inf file.
Look on any autorun CD and follow the format.
As for the Flash thing the MM Flash Detection Kt it MAY have something in it
to help!
I'll dig out the l...
RE: FN-FORUM: FN Approved links list still alive? If not then the usual JS menu request...
date posted 8th August 2003 22:10
Can we add http://www.4guysfromrolla.com/ to the asp section?
Karl
> -----Original Message-----
> From: [EMAIL REMOVED] [EMAIL REMOVED] On
> Behalf Of Andy Hutchinson
> Sent: 08 August 2003 19:53
>...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 20:37
Hi Luke, I was trying out the script you sent and I'm not sure if I'm using
it properly...
I've put the function in and I have the following mouseovers and outs:
Introduct...
FN-FORUM: Flash browser detection and autorun
date posted 8th August 2003 20:01
Hello Everybody,
Have a problem with a CDROM, the cd has been produced as an online catalogue
in flash, I am looking to run this from the browser and I will burn the
plugin install files onto the cdr...
RE: FN-FORUM: FN Approved links list still alive? If not then the usual JS menu request...
date posted 8th August 2003 19:39
Well most of mine have been added!
Jamie Lewis
Low Cost Web Hosting - http://www.eyota-web-hosting.co.uk
Bespoke Web & IT Solutions - http://www.eyota.co.uk
-----Original Message-----
From: [EMAIL R...
Re: FN-FORUM: FN Approved links list still alive? If not then the usual JS menu request...
date posted 8th August 2003 19:25
Latest version below:
Amend, add to and otherwise augment as you see fit - just chop the
advertising/unsubscribe junk from the end of this email and add those links
you find indispensible for your wo...
Re: FN-FORUM: 11th commandment
date posted 8th August 2003 19:24
Hehe, you obviously haven't been there for a while, it's been 'done up'. And
not Stroud, Nailsworth :)
Hutch
----- Original Message -----
From: "Dave Polhill" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sen...
Re: FN-FORUM: Have you heard of flash mobs?
date posted 8th August 2003 18:38
Deborah Causton wrote:
> Yeah, heard about it... Our DesignClub just discussed organising one
> in Luxembourg.
>
> http://www.cheesebikini.com/
>
For some reason the notion appeals to me, but we don't...
RE: FN-FORUM: Drinks!
date posted 8th August 2003 18:36
Your in Leeds ?
Regards
=20
Darren Spink
TEL: +44(0)113 253 4750
FAX: +44(0)113 253 1686
EML: [EMAIL REMOVED]
ICQ: 56667649=20
PGP Public Key:
http://pgpkeys.mit.edu:11371/pks/lookup?op=3Dget&searc...
RE: FN-FORUM: Have you heard of flash mobs?
date posted 8th August 2003 18:29
Yeah, heard about it... Our DesignClub just discussed organising one in
Luxembourg.
http://www.cheesebikini.com/
Deborah
=20
=20
:::::: A t o m i c P h u s e ::::::
=20
=20
-----Original Message-...
FN-FORUM: Have you heard of flash mobs?
date posted 8th August 2003 18:20
Just picked this up from the .net mailing list and I thought it might tickle
a few of you. I am (at last) getting out to the pub while the sun is still
hot...
.net mailing list wrote:
> Have you hear...
Re: FN-FORUM: cd rom production
date posted 8th August 2003 17:58
On Friday, August 8, 2003, at 12:54 PM, adrian day wrote:
>
> can anyone give me any advice on the following:
>
> if i produce a CD-rom with mpeg video in there.
>
> Should i produce it in director o...
RE: FN-FORUM: 11th commandment[OT} now BBQ.
date posted 8th August 2003 17:36
Just had the bill in for the food so far! £155. Away out shopping again in
the morning
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Paul J
White
Sent: 08 August 2003 1...
FN-FORUM: Anyone in Woking?
date posted 8th August 2003 17:31
Anyone here work as a freelance in woking/surrounding area? I though it
would be nice to get in contact with some other local creatives for
those days when sitting by yourself in front of a Mac get...
RE: FN-FORUM: CD Ripper
date posted 8th August 2003 17:30
What about good old Cdex http://cdexos.sourceforge.net/
Free and full of function.
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of John
> Olival
> Sent: 07 August 2003 23:01
> To: FN-FORUM / [EMAIL R...
Re: FN-FORUM: CD Ripper
date posted 8th August 2003 17:23
I would go with that, its the ripper of choice for me anyways, but I hear
Audiograbber is OK aswell :)
Regards
John
----- Original Message -----
From: "Nick B" [EMAIL REMOVED]
To: [EMAIL REMOVED]
S...
RE: FN-FORUM: Another Flash AS Query
date posted 8th August 2003 16:59
Try this way:-
mySecs = new Date();
secs = mySecs.getSeconds();
For your Secs, Mins & Hours part of the code.
Chris....
FN-FORUM: Direct sales
date posted 8th August 2003 16:55
Hi
I could do with some help on two specific areas regarding direct sales.
Firstly, is there any software that people use for this? I’m currently just
using a spreadsheet to track all the compan...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 16:47
hey nita,
good luck with it - go take a break and come back ;-)
toggling the visibility should be the easiest method - let me know if i=20=
can help make things any clearer
luke
On Friday, Augus...
FN-FORUM: Drinks!
date posted 8th August 2003 16:45
Well.. It's getting close of play of Friday evening..
Anyone in leeds feel like getting together for a drink and chat?
Kel....
FN-FORUM: illustration stock graphics?
date posted 8th August 2003 16:23
I'm looking for sites other than istockphoto that have well-priced stock
illustrations rather than just photos for purchase. Anyone have any
recommendations?
Cheers
Elizabeth...
FN-FORUM: Flash Radio Button Components
date posted 8th August 2003 16:21
Hi all
Anyone ever come across this...
I've got a flash movie clip with approx 30 radio buttons on the
timeline, the problem is that when I go to preview in the Flash player
it's fairly slow to load...
FN-FORUM: Another Flash AS Query
date posted 8th August 2003 16:10
Hi
Got this script of flashkit, to add a seconds ticking clock. It's just a
copy and paste thing but it doesn't work, was wondering if anybody could
have a quick look and tell me where I'm going wron...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 16:07
Thanks again...
too hot for all this thinking!
;o)
----- Original Message -----
From: "Luke Perman" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Friday, August 08, 2003 4:31 PM
Subject: Re: FN-FORUM:...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 16:07
Thanks very much Luke, I'm not sure how clear it is yet, but I'll give it a
go.... basically to describe what you would have seen....
I have a div on the left hand side of the page which contains a l...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 16:03
hi nita
if you are gonna toggle the property of the layer, your path to it in=20
javascript will be:
document.all[theLayer].style.visibility
not
document.all.[theLayer]....
note - the extra '.' y...
RE: FN-FORUM: How's this for an idea..
date posted 8th August 2003 16:01
i am surprised you havent been voted off monsterland.
;-)
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Dan
Norcott
Sent: 08 August 2003 16:14
To: FN-FORUM / [EMAIL REMO...
Re: FN-FORUM: Macromedia Director Help?
date posted 8th August 2003 15:59
Thanks jon
Most Appreciated I will give that a try later tonight.
Rachael.
>From: [EMAIL REMOVED]
>Reply-To: [EMAIL REMOVED]
>To: FN-FORUM / [EMAIL REMOVED] [EMAIL REMOVED]
>Subject: Re: FN-FORUM:...
Re: FN-FORUM: 11th commandment
date posted 8th August 2003 15:58
Martin Kellie wrote:
> Studio in this heat Paul! Ouch!
>
It's the Cluny Studio - the control room actually opens onto the Ouseburn
River and is South facing. With a 30ft lead plugged into the desk,...
Re: FN-FORUM: Freehand help
date posted 8th August 2003 15:56
Don't use Freehand MX much, it clashes with suitcase.
Only thing I can think of if it looks fine on screen and pdfs OK (have=20=
you tried it?) it must be a vector thing with your printer driver. If...
Re: FN-FORUM: 11th commandment
date posted 8th August 2003 15:56
on 8/8/03 2:21 pm, Darren Beale at [EMAIL REMOVED] wrote:
> Thou shalt all go to the pub on a hot Friday afternoon
>
> ;D
>
> (somewhere in Clerkenwell if you're interested)
>
> 07711 716197
I'd...
RE: FN-FORUM: Americanising textMOre info
date posted 8th August 2003 15:50
typical; put work first!
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Lists
Sent: Friday, August 08, 2003 11:24
To: FN-FORUM / [EMAIL REMOVED]
Subject: Re: FN-FORUM: Ame...
RE: FN-FORUM: FN Approved links list still alive? If not then the usual JS menu request...
date posted 8th August 2003 15:47
Tried to send you a .js script, but it bounced
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Rich Gray
Sent: 08 August 2003 15:44
To: FN-FORUM / [EMAIL REMOVED]
Subject:...
Re: FN-FORUM: How's this for an idea..
date posted 8th August 2003 15:45
And this is the best picture I have of me.
http://www.monsterland.co.uk/various/ooer.jpg
You don't want to see the others.
[sorry for those who've seen it before, you'll have to go and buy a new
ey...
RE: FN-FORUM: How's this for an idea..
date posted 8th August 2003 15:45
Well.. seeing as I haven't had a definitive yes/no.. I'll knock
something together over the weekend and people can upload if they feel
like it.. Lol
Cheers
Kel.
-----Original Message-----
From: [E...
RE: FN-FORUM: FN Approved links list still alive? If not then the usual JS menu request...
date posted 8th August 2003 15:42
"Unobtrusive JS menus"
http://kryogenix.org/code/browser/aqlists/
Uses unordered lists with an external JS file. Very quick to implement.
Fab concept. However, I've never been able to get them to wor...
Re: FN-FORUM: Macromedia Director Help?
date posted 8th August 2003 15:40
paste this into a text member's sprite script:
property spriteNum,this
on beginSprite me
this = sprite(spriteNum)
end
on enterFrame me
this.member.text = string(the long time)
end
HTH
Jon Row...
Re: FN-FORUM: How's this for an idea..
date posted 8th August 2003 15:39
I have a nice piece of MS Office stock photography masquerading as me. Looks
a lot better.
So, I look nothing like this: http://www.londoneditors.co.uk/our_team.htm
+++++++++++++++++++++++++++++++++...
Re: FN-FORUM: WinXP & Icons
date posted 8th August 2003 15:26
Kerry K-C wrote:
> I'm hoping there's an easy answer to this one .... I've just built a
> new PC, installed WinXP etc but, for some reason, some of the icons
> are not being displayed - e.g. Internet...
Re: FN-FORUM: 11th commandment
date posted 8th August 2003 15:25
Paul J White wrote:
> Martin Kellie wrote:
>
>>Just back from the pub, fridge all stocked up with cold lager, busy
>>preparing for a large BBQ tomorrow - Ema, Paul???
>
> Have you slaughtered the fa...
RE: FN-FORUM: 11th commandment
date posted 8th August 2003 15:24
It's not the £300 on meat (meat alone - and just me - others bring some of
their own) one just yet, but a larger one than normal - two BBQs on the go,
and loads of food and drink. Shame, would have...
RE: FN-FORUM: FN Approved links list still alive? If not then the usual JS menu request...
date posted 8th August 2003 15:23
If it helps.. I use Tigra Menu Gold (www.softcomplex.com) I figured out
the JS menu structure and wrote some php code to dynamically make the
menus from a DB..=20
It is *very* adaptable and not too d...
Re: FN-FORUM: FN Approved links list still alive? If not then the usual JS menu request...
date posted 8th August 2003 15:20
Rich Gray wrote:
> (sorry to ask such a FAQ but...) I'm looking for recommendations for
> a good javascript dynamic menu - I liked the YoungPup slideout menus
> but they didn't quite have the flexibil...
Re: FN-FORUM: 11th commandment
date posted 8th August 2003 15:18
Martin Kellie wrote:
> Just back from the pub, fridge all stocked up with cold lager, busy
> preparing for a large BBQ tomorrow - Ema, Paul???
>
Have you slaughtered the fatted Ox again this year? I'm...
FN-FORUM: FN Approved links list still alive? If not then the usual JS menu request...
date posted 8th August 2003 15:16
There used to be like a reference list of URLs for recommended
tools/sites/other stuff that someone used to maintain and post to the list
on an irregular basis (was it you Hutch?) well any chance of i...
FN-FORUM: well-designed magazine sites
date posted 8th August 2003 15:07
Can anyone suggest any magazine sites thast they think are well-designed or
have great logos?
Cheers
Elizabeth...
RE: FN-FORUM: 11th commandment
date posted 8th August 2003 15:07
Just back from the pub, fridge all stocked up with cold lager, busy
preparing for a large BBQ tomorrow - Ema, Paul???
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Rob Co...
Re: FN-FORUM: Desks
date posted 8th August 2003 15:07
> I have to say, that looks f-kin cool!
>
> Kinda Laura Ashley meets Terminator 3?
Apart from the girly 'forever friends' teddy card on the left behind the
dragon!
Lindsey Hill
__________________...
RE: FN-FORUM: Desks
date posted 8th August 2003 15:04
Looks at them tab butts! ;-)
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Craig
Tinson
Sent: 08 August 2003 13:51
To: FN-FORUM / [EMAIL REMOVED]
Subject: RE: FN-FORUM: D...
RE: FN-FORUM: Desks Way OT now!
date posted 8th August 2003 15:03
Now, for REALLY good hot dogs, you have to go to Denmark, really, really
nice
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Justin
Sent: 08 August 2003 13:43
To: FN-FORUM...
RE: FN-FORUM: Desks
date posted 8th August 2003 14:57
Probably already been said, but is that in pixels? ;-)
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Paul Civati
Sent: 08 August 2003 12:04
To: FN-FORUM / [EMAIL REMOVED]...
RE: FN-FORUM: 11th commandment
date posted 8th August 2003 14:55
darn. too late... i had to make do with a meal deal from boots in leeds
train station.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Craig
Tinson
Sent: 08 August 2003 1...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 14:52
Thanks Alan, I'm considering using the visibility option - but after trying
this out it seems fiddly, I keep getting an error (testing on IE6 ....
document.all.[...] is null or not an object).
I must...
RE: FN-FORUM: Italian translations
date posted 8th August 2003 14:50
ta
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Nita
Sent: 08 August 2003 15:11
To: FN-FORUM / [EMAIL REMOVED]
Subject: Re: FN-FORUM: Italian translations
Hi, I think...
RE: FN-FORUM: 11th commandment
date posted 8th August 2003 14:45
Blimey - wasn't expecting to find any other Stroudies on this list...
Have a pint of something strange and dark with twigs in for me ;-)
Dave
-----Original Message-----
From: [EMAIL REMOVED] [EMA...
Re: FN-FORUM: Italian translations
date posted 8th August 2003 14:43
Hi, I think some of the German is:
Submit = Absenden
Register = Registrieren
log in = Einloggen
Search = Suchen
Find = Finden
Cancel = Abbrechen
Hope this helps (I'm not a native speaker, but I hav...
Re: FN-FORUM: 11th commandment
date posted 8th August 2003 14:38
Darren Beale wrote:
> Thou shalt all go to the pub on a hot Friday afternoon
>
Sounds good to me...
http://www.weir86.freeserve.co.uk/FreeTradeInn.html
It's not quite as ramshackle as that photo wou...
RE: FN-FORUM: Desks
date posted 8th August 2003 14:38
Having just downloaded a couple of hundred mails I don't have a chance
to check if anyone suggested this already ...
I 'built' a great desk using worksurface from B&Q - a 3M length is
around =A330 I...
Re: FN-FORUM: Word to .PDF problem
date posted 8th August 2003 14:37
Paul wrote:
>I have a problem when trying to convert a Word document into a .PDF file
>from within word.. I have Office XP Pro and Adobe Acrobat V4.0.
>
>The error message I get when I try to create...
RE: FN-FORUM: Australia Competition
date posted 8th August 2003 14:36
That'll do for me
www.bbqchristmas.co.uk/competition please let all yer mates know cos we need
some numbers.
There is no soul selling, you just get a newsletter which of course you can
unsubscribe f...
RE: FN-FORUM: Word to .PDF problem
date posted 8th August 2003 14:35
Why not try it the other way, open acrobat and import the word document
?
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of Paul
Summers
Sent: 08 August 2003 14:58
To: FN-...
Re: FN-FORUM: Australia Competition
date posted 8th August 2003 14:33
Rob Colton wrote:
>Can I post a link to a competition we are running for our client - Calor
>Gas? Prize is a 2 week holiday in Oz at Xmas with Xmas Day BBQ, Sydney,
>Cairns, trips, etc.
But the heat...
FN-FORUM: Word to .PDF problem
date posted 8th August 2003 14:31
Hi all
I have a problem when trying to convert a Word document into a .PDF file
from within word.. I have Office XP Pro and Adobe Acrobat V4.0.
The error message I get when I try to create the .PDF...
FN-FORUM: WinXP & Icons
date posted 8th August 2003 14:30
I'm hoping there's an easy answer to this one .... I've just built a new
PC, installed WinXP etc but, for some reason, some of the icons are not
being displayed - e.g. Internet Explorer is showing a s...
Re: FN-FORUM: Site Check - Netscape prob
date posted 8th August 2003 14:24
I don't get the compass on NS 7.1 at all either...
----- Original Message -----
From: "Alan Sheppard" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Friday, August 08, 2003 2:40 PM
Subject: RE: FN-FORUM:...
Re: FN-FORUM: Desks - OT now
date posted 8th August 2003 14:15
I sympathise.
I can't get the guts to let mine grow back, so a number 2 every week it =
is... still, nice in this weather!
-----Original Message-----
From: Craig Tinson [EMAIL REMOVED]
Sent: Fri 08...
RE: FN-FORUM: Site Check - Netscape prob
date posted 8th August 2003 14:13
Garry
I don't get the compass at all here on NS which is why it looked ok
In the source the tag looks odd
and...
FN-FORUM: Australia Competition
date posted 8th August 2003 14:12
Can I post a link to a competition we are running for our client - Calor
Gas? Prize is a 2 week holiday in Oz at Xmas with Xmas Day BBQ, Sydney,
Cairns, trips, etc.
Would love to give you all a chan...
RE: FN-FORUM: How's this for an idea..
date posted 8th August 2003 14:11
Sure.. The more interesting stuff the better.. :)
Kel.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of Rus
Foster
Sent: Friday, August 08, 2003 2:31 PM
To: FN-FORUM /...
FN-FORUM: Macromedia Director Help?
date posted 8th August 2003 14:11
Does anyone know Director Lingo for making a Digital clock ive search on the
internet and I have failed to find what I am looking for.
Can any1 help?
Thanx
Rach xxx
___________________________...
RE: FN-FORUM: 11th commandment
date posted 8th August 2003 14:08
Somewhere in leeds for me I think.. If anyones interested.. Lol
Kel..
0113 294 7381
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of Andy
Hutchinson
Sent: Friday, Aug...
Re: FN-FORUM: Freehand help
date posted 8th August 2003 14:08
Hello Lindsey,
Freehand MX. Color preferences are set to Kodac
without spot color, seperations and perceptual, apple
studio display (amazing how it prints the same colour
as on the screen).
Printer...
Re: FN-FORUM: How's this for an idea..
date posted 8th August 2003 14:07
Craig Tinson wrote:
> Who likes the idea of a website where freelancers can post photo's of
> themselves?
>
> We could all get an idea of who it is posting then!! Lol
Why is it that when I finally...
RE: FN-FORUM: How's this for an idea..
date posted 8th August 2003 14:07
I was wondering about setting something like this, infact I have a forum
that's works like this where we can also add a profile, I would be happy to
set one up and we could all transfer to there, no a...
Re: FN-FORUM: 11th commandment
date posted 8th August 2003 14:06
love to, but just a tad far away here in st.albans....
On Friday, August 8, 2003, at 02:22 PM, Darren Beale wrote:
> Thou shalt all go to the pub on a hot Friday afternoon
>
> ;D
>
> (somewhere in...
Re: FN-FORUM: How's this for an idea..
date posted 8th August 2003 14:06
er, no, camera shy me ;-)
(www.evoke-media.com/html/self.htm)
On Friday, August 8, 2003, at 02:28 PM, Craig Tinson wrote:
>
>
> Who likes the idea of a website where freelancers can post photo's of...
Re: FN-FORUM: How's this for an idea..
date posted 8th August 2003 14:05
Craig Tinson wrote:
> Who likes the idea of a website where freelancers can post photo's of
> themselves?
>
> We could all get an idea of who it is posting then!! Lol
>
I think we've been here before...
RE: FN-FORUM: 11th commandment
date posted 8th August 2003 14:05
I am afraid that we have put the local on warning all ready and they promise
to have full stocks of cold beer, cider, guiness and other cold refreshing
and intoxicating beverages. Theale, Berkshire,...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 14:03
hi nita,
yea, i'm not sure what the problem is -- i have the same trouble with
my new re-designed website - i've converted the whole site to be CSS
driven and now it freezes up in IE on the mac! e...
Re: FN-FORUM: How's this for an idea..
date posted 8th August 2003 14:02
On Fri, 8 Aug 2003, Craig Tinson wrote:
>
>
> Who likes the idea of a website where freelancers can post photo's of
> themselves?
>
> We could all get an idea of who it is posting then!! Lol
>
> Kel....
RE: FN-FORUM: Desks
date posted 8th August 2003 14:02
That=92s there for a reason.. am 2 months into growing my hair back from
shaved.. And it looks a mess.. Keep needing to fix it.. Lol
Kel.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL RE...
Re: FN-FORUM: 11th commandment
date posted 8th August 2003 14:01
Mmmm... I'm going to hit the Halfway Inn at the top of Minchinhampton
Common I think.
Hutch
----- Original Message -----
From: "Darren Beale" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Friday, Augus...
FN-FORUM: How's this for an idea..
date posted 8th August 2003 14:00
Who likes the idea of a website where freelancers can post photo's of
themselves?
We could all get an idea of who it is posting then!! Lol
Kel.
-----Original Message-----
From: [EMAIL REMOVED] [...
RE: FN-FORUM: Desks
date posted 8th August 2003 13:57
Am not guilty with the card.. I don't decide what card I get for
anniversaries.. Lol
But the dragons are down to me.. Have to admit I love 'em.. Lol
Kel.
-----Original Message-----
From: [EMAIL REM...
Re: FN-FORUM: Desks
date posted 8th August 2003 13:57
I dunno, the comb looked fairly strategically placed ;-)
-----Original Message-----
From: Matt Burns [EMAIL REMOVED]
Sent: Fri 08/08/2003 14:17
To: Richie Ellison
Cc:=09
Subject: Re: FN-FORUM: Desks...
RE: FN-FORUM: Desks
date posted 8th August 2003 13:56
There... Proved it's me... Try again.. lol
Kel.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of Carla
Boulton
Sent: Friday, August 08, 2003 2:12 PM
To: FN-FORUM / [EM...
FN-FORUM: 11th commandment
date posted 8th August 2003 13:54
Thou shalt all go to the pub on a hot Friday afternoon
;D
(somewhere in Clerkenwell if you're interested)
07711 716197...
RE: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 13:53
I seem to recall that the default object for innerHTML in NS6+/IE5+ is
document.all and that NS uses the Class or Name tag and IE uses the Id tag
to identify the DIV.
For stuff that I know is only...
Re: FN-FORUM: Desks
date posted 8th August 2003 13:51
> I have to say, that looks f-kin cool!
>
> Kinda Laura Ashley meets Terminator 3?
Apart from the girly 'forever friends' teddy card on the left behind the
dragon!
Lindsey Hill
__________________...
Re: FN-FORUM: Desks
date posted 8th August 2003 13:50
Carla Boulton wrote:
> on 8/8/03 12:51 pm, Craig Tinson at [EMAIL REMOVED] wrote:
>
>
>>Ok.. you asked for it.. but I didn't say I ever kept it tidy.. Lol
>>
>>http://craig.intraynet.co.uk/desk.php...
RE: FN-FORUM: Desks
date posted 8th August 2003 13:50
Hey now.. there's an overflowing ash-tray..=20
Admitedly I did move the litre bottle of San Miguel to the other side of
the room.. but you have to make an effort yanno? Lol
Kel.
=20
-----Original M...
Re: FN-FORUM: Freehand help
date posted 8th August 2003 13:44
Are you printing direct from freehand, what version? What printer do you=20=
have?
Lindsey Hill
____________________
Apperley Design
design | create | innovate
T: 01274 421410
www.apperleydesign.co....
Re: FN-FORUM: Desks
date posted 8th August 2003 13:44
on 8/8/03 12:51 pm, Craig Tinson at [EMAIL REMOVED] wrote:
>
> Ok.. you asked for it.. but I didn't say I ever kept it tidy.. Lol
>
> http://craig.intraynet.co.uk/desk.php
>
> Kel.
Is it your day...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 13:42
Thanks Luke, that's great, I was considering using the visibilty of the
layers as my next option.... I shall use this instead... I'd be really
grateful for code snippets, thanks very much!
Sorry abou...
Re: FN-FORUM: Site Check www.phonetemple.net
date posted 8th August 2003 13:40
Nah, mine's definitely better. :)
Still, very nice, clean site you have there - works with no problems
here.
Dom
In message [EMAIL REMOVED] Charles E.Gatenby
[EMAIL REMOVED] writes
>
>He he, ver...
RE: FN-FORUM: Desks
date posted 8th August 2003 13:40
I have to say, that looks f-kin cool!
Kinda Laura Ashley meets Terminator 3?
Chaz.
> From: Craig Tinson [EMAIL REMOVED]
>
> Ok.. you asked for it.. but I didn't say I ever kept it tidy.. Lol
>...
RE: FN-FORUM: Italian translations
date posted 8th August 2003 13:39
Merci Beaucoup pour les assistance or someting like that to all help with
the translations
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Carla
Boulton
Sent: 08 August 200...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 13:39
On Friday 08 Aug 2003 10:27 am, Gerard McGovern wrote:
> > Surely whether its and mp3 or wav its already stored as a
> > string of numbers?
>
> In theory it is already stored as a string of 0's and 1'...
Re: FN-FORUM: Italian translations
date posted 8th August 2003 13:35
on 8/8/03 12:43 pm, Rob Colton at [EMAIL REMOVED] wrote:
>
> Does anyone know Italian, German, French and Spanish for
>
> Submit (as in Submit button)
> Please click here to continue
>
> I tried a...
RE: FN-FORUM: Site Check - Netscape prob
date posted 8th August 2003 13:34
The compass in the background is on top of the text.
>From: Alan Sheppard [EMAIL REMOVED]
>Reply-To: [EMAIL REMOVED]
>To: FN-FORUM / [EMAIL REMOVED] [EMAIL REMOVED]
>Subject: RE: FN-FORUM: Site Chec...
RE: FN-FORUM: Site Check - Netscape prob
date posted 8th August 2003 13:31
Seems to be ok on NS7.0 Win98 except the weather forecast links look like std underlined, no rollover and Synoptics has no link.
What problem are you getting.
Alan S
On 08 August 2003 13:20, garry...
RE: FN-FORUM: Italian translations
date posted 8th August 2003 13:31
Italian Translation is:
Submit == Invio
Please click here to continue == Si prega premere Invio per continuare
I am mother tongue Italian so the translation is correct.
Modesto Quarato
www.modtr...
Re: FN-FORUM: Desks
date posted 8th August 2003 13:25
On Friday, August 8, 2003, at 11:47 AM, Matt wrote:
>
> I've been looking at getting a new desk recently, but they all seem a=20=
> little small for what I need. I'm looking for something that can=...
RE: FN-FORUM: Desks
date posted 8th August 2003 13:23
Ok.. you asked for it.. but I didn't say I ever kept it tidy.. Lol
http://craig.intraynet.co.uk/desk.php
Kel.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of Paul
Civ...
RE: FN-FORUM: cd rom production
date posted 8th August 2003 13:23
Adrian
If it's like one I put together a couple of years ago for a client that
used PDF, then Adobe produce (or did) a Acrobat reader runtime installer
package which could be included on the CD pro...
RE: FN-FORUM: Desks Way OT now!
date posted 8th August 2003 13:17
Ikea here too. Desks, cupboards, filing cabinets, chairs, lights and
meatballs. The desks are a bit wobbly though - I'd go for something more
trestley(?), or maybe just put them together better than I...
FN-FORUM: Italian translations
date posted 8th August 2003 13:16
Does anyone know Italian, German, French and Spanish for
Submit (as in Submit button)
Please click here to continue
I tried a few oline translators but was not encouraged when translating the
transl...
RE: FN-FORUM: Desks Way OT now!
date posted 8th August 2003 13:15
>I could have got the legs from B&Q too I suppose, but then I wouldn't have
had the meatballs...
I had meatballs there too last week but they were cold by the time I'd paid.
Prefer the hotdogs myself...
RE: Re[2]: FN-FORUM: Desks
date posted 8th August 2003 13:13
I am glad I am not the only one with a 3foot pile of paper. Although a
picture of girlfriend rather than cat and a dog under the desk snoozing.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL...
Re: FN-FORUM: Desks
date posted 8th August 2003 13:01
Craig Tinson [EMAIL REMOVED] wrote:
> I had a similar issue a few weeks ago.. I've converted my third bedroom=
> into an office and wanted a desk that would fit properly (ie, around tw=
o
> walls) i...
RE: FN-FORUM: Desks
date posted 8th August 2003 13:00
Nope.. Saw some there but they were too thick to work with.. Got some
from a local hardware shop near me..
Kel.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of David
M...
Re[2]: FN-FORUM: Desks
date posted 8th August 2003 12:59
I built my own out of kitchen worktop and some ikea legs - jigsaw some
cable holes in the back, shove some ikea CPU holders underneath, bit
of twisty plastic cable tidy - about 5 hours work and £200...
FN-FORUM: Site Check - Netscape prob
date posted 8th August 2003 12:52
Hi all,
I have a problem with
http://www.commodore-yachting.com
when viewed in Netscape.
How do I solve the problem? I'd be very grateful for any ideas.
Cheers,
Garry W
_________________________...
Re: FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 12:42
hi nita,
unfortunately the page crashed my IE on Mac so i couldn't really look=20
at exactly what you were changing - but i often use 'onClick's to swap=20=
layers about - the absolute easiest way t...
RE: FN-FORUM: Desks
date posted 8th August 2003 12:40
The office I inherited has a home made L shaped corner work surface cut
to size from 25mm ply, stained a funky streaky violet, which works very
well. Since it is attached to the wall I had to drill a...
RE: FN-FORUM: Desks
date posted 8th August 2003 12:39
Guilty as charged.. Lol
Kel.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of Adam
Dyson
Sent: Friday, August 08, 2003 12:30 PM
To: FN-FORUM / [EMAIL REMOVED]
Subject: R...
RE: FN-FORUM: Desks
date posted 8th August 2003 12:33
> Thanks for all the suggestions folks! I was last in IKEA looking at
> beds, never thought to take a look at the desks or tables...
>
> Ta,
> Matt.
Another Ikea tip:
go find the bargain corner in...
Re: FN-FORUM: flash question
date posted 8th August 2003 12:28
yes
----- Original Message -----
From: "adrian day" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Friday, August 08, 2003 12:18 PM
Subject: FN-FORUM: flash question
>
> does flash.exe stand alone on a...
Re: FN-FORUM: flash question
date posted 8th August 2003 12:27
adrian day wrote:
> does flash.exe stand alone on a machine without havin to have flash
> player installed.
Are you talking about a projector (a Flash file embedded in a .exe) or
the Flash IDE/aut...
RE: FN-FORUM: flash question
date posted 8th August 2003 12:27
Yes..its embedded in the exe file...notice the size of the file
increases!
> -----Original Message-----
> From: [EMAIL REMOVED] [EMAIL REMOVED] On=20
> Behalf Of adrian day
> Sent: 08 August 2003...
FN-FORUM: Freehand help
date posted 8th August 2003 12:27
When printing I get a black box around text. What do I need to do in
freehand to prevent this?
Manjit...
FN-FORUM: cd rom production
date posted 8th August 2003 12:26
can anyone give me any advice on the following:
if i produce a CD-rom with mpeg video in there.
Should i produce it in director or flash ?
Do i need to install flash and shockwave players on the CD-...
Re: FN-FORUM: flash question
date posted 8th August 2003 12:16
> does flash.exe stand alone on a machine without havin to have flash
> player installed.
Yep.. I believe so.
Jon...
Re: FN-FORUM: Desks
date posted 8th August 2003 12:16
Did you get the metal sheets at B&Q?
Dave
----- Original Message -----
From: "Craig Tinson" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Friday, August 08, 2003 12:18 PM
Subject: RE: FN-FORUM: Desks...
FN-FORUM: Neat alternative browser tool ...
date posted 8th August 2003 12:13
http://www.kreacom.dk/tools/optool/
Optool (formerly Operatool, now Optional Browser tool or
Open-in-another-browser-tool - or whatever you like!) for MS Windows is a
freeware utility which easily al...
FN-FORUM: Fw: Javascript problem (another one!)
date posted 8th August 2003 12:13
Hi all, I was wondering if anyone can help with this, I'm sure it's very
simple but it's causing me some pain - for the past hour and a half !!
I'm trying to change the html content of a particlua...
Re: FN-FORUM: Desks Way OT now!
date posted 8th August 2003 12:12
I did the Ikea thing for a friend. Big desk and four legs...
The other thing I did for myself was a big bit of wood from B&Q, and =
some legs from Ikea. I could have got the legs from B&Q too I sup...
Re: FN-FORUM: flash question
date posted 8th August 2003 12:12
adrian day wrote:
>
> does flash.exe stand alone on a machine without havin to have flash
> player installed.
Yep...
RE: FN-FORUM: flash question
date posted 8th August 2003 12:11
yes
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of adrian
day
Sent: 08 August 2003 12:19
To: FN-FORUM / [EMAIL REMOVED]
Subject: FN-FORUM: flash question
does flash.exe...
Re: FN-FORUM: Desks
date posted 8th August 2003 12:09
I got my tables from IKEA.. they are good. Like big trestle tables. Easy to
move about too cos you can just lift off the tops. Not that pricy either.
> Thanks for all the suggestions folks! I was...
Re: FN-FORUM: Desks
date posted 8th August 2003 12:08
For our home office we got Habitat trestles and table-tops - sturdy as hell.
I have 3 monitors (22", 17", 17"), two PCs, fridge and assorted empty
Walkers Sensations Spare Rib flavour crisp packets on...
RE: FN-FORUM: Damn M-F Spammers!
date posted 8th August 2003 12:05
"Find the Spammers Address" .... now, that's not going to be at all easy. :0
Thanks,
Noah
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Darren
Beale
Sent: 08 August 200...
RE: FN-FORUM: Desks
date posted 8th August 2003 12:02
Paul > nice sturdy proper office desk.. it is lovely though, 1600x800
Admit it. Who else thought "resolution", even for a split second? Is this
another sign that we need to get out more? On the othe...
RE: FN-FORUM: telephony systems
date posted 8th August 2003 12:01
just spoke to richard he is sorting something out, cheers
Andrew
>-----Original Message-----
>From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Charles
>E.Gatenby
>Sent: 08 August 2003 11:58
>To: FN-F...
RE: FN-FORUM: Desks
date posted 8th August 2003 11:58
Dan N wrote:
>> I can't seem to find "grom" in my Ikea catalogue. There's "bonde",
>> "effektiv", "faktum", pax", "poäng"...
>
> Heh - I was tempted to go for that gag too - for once, someone had
>...
RE: FN-FORUM: Desks
date posted 8th August 2003 11:54
I've had 2 from IKEA - first now doubles as a spare dining table for
christmas (you can geta bout 8 peopple round it). I've now got a big L
shaped one with a curve in the inner bit of the L. I get a p...
Re: FN-FORUM: Balloon printing - OT now
date posted 8th August 2003 11:52
Dan Norcott wrote:
> The only art installation I've ever enjoyed was a silly
> room-full-of-balloons in leeds - some gallery or other had a big
> underground room with a spiral staircase in the middle...
Re: FN-FORUM: Desks Way OT now!
date posted 8th August 2003 11:51
> I can't seem to find "grom" in my Ikea catalogue. There's "bonde",
> "effektiv", "faktum", pax", "po?ng"...
they sound like diaretic treatments !
Ikea++ for desks
Then again I got mine from HomeB...
FN-FORUM: flash question
date posted 8th August 2003 11:50
does flash.exe stand alone on a machine without havin to have flash
player installed....
FN-FORUM: Javascript problem (another one!)
date posted 8th August 2003 11:50
Hi all, I was wondering if anyone can help with this, I'm sure it's very
simple but it's causing me some pain - for the past hour and a half !!
I'm trying to change the html content of a particluar C...
RE: FN-FORUM: Desks
date posted 8th August 2003 11:50
I had a similar issue a few weeks ago.. I've converted my third bedroom
into an office and wanted a desk that would fit properly (ie, around two
walls) in a L shape (2m long each side).. there was no...
Re: FN-FORUM: Desks
date posted 8th August 2003 11:47
Thanks for all the suggestions folks! I was last in IKEA looking at
beds, never thought to take a look at the desks or tables...
Ta,
Matt.
Matt Burns [EMAIL REMOVED]
Freelance Web/New Media Consul...
Re: FN-FORUM: Desks
date posted 8th August 2003 11:45
> Matt E wrote:
> > Buy a tabletop and legs grom IKEA?
>
> I can't seem to find "grom" in my Ikea catalogue. There's "bonde",
> "effektiv", "faktum", pax", "poäng"...
Heh - I was tempted to go for...
RE: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 11:44
>Blowing your nose when you get to the office, only to discover that
your
>hanky is now full of black snot...
BBC (black bogey city) as friends from the country call it.
=20
=20
:::::: A t o m i c P...
RE: FN-FORUM: Unsual idea...
date posted 8th August 2003 11:43
Actually... I'm not converting the waveform so I can compress it or
manipulate it.. as has been said this has already been done many many
times (different audio formats) I was wanting to store a vers...
Re: FN-FORUM: Desks
date posted 8th August 2003 11:38
on 8/8/03 10:54 am, Matt Edwards at [EMAIL REMOVED] wrote:
>=20
> Buy a tabletop and legs grom IKEA?
>=20
> Matt
>=20
we got ours from Focus, two =A329 ones with drawers, still oging strong 3 yrs
lat...
RE: FN-FORUM: Desks
date posted 8th August 2003 11:36
Matt E wrote:
> Buy a tabletop and legs grom IKEA?
I can't seem to find "grom" in my Ikea catalogue. There's "bonde",
"effektiv", "faktum", pax", "poäng"...
--
[EMAIL REMOVED]
DJSE Limited, Willo...
RE: FN-FORUM: Desks
date posted 8th August 2003 11:36
Buy as big as you can get. Most office desks seem terribly small, so why not
just get a giant table top from Ikea and some legs?
I use what was originally a dining table from Ikea - lots and lots of...
Re: FN-FORUM: Desks
date posted 8th August 2003 11:36
Matt [EMAIL REMOVED] wrote:
> I've been looking at getting a new desk recently, but they all seem
> a little small for what I need. =
Cheapo home office desks generally are.. I gave up in the end...
RE: FN-FORUM: Desks
date posted 8th August 2003 11:34
Matt B wrote:
> I've been looking at getting a new desk recently, but they all seem a
> little small for what I need. I'm looking for something that can
> handle not just a desktop PC, monitor and sp...
Re: FN-FORUM: Desks
date posted 8th August 2003 11:33
MFI?
Lindsey
____________________
Apperley Design
design | create | innovate
T: 01274 421410
www.apperleydesign.co.uk
On Friday, August 8, 2003, at 11:54 AM, Matt Edwards wrote:
>
> Buy a tableto...
Re: FN-FORUM: Desks
date posted 8th August 2003 11:33
Matt wrote:
> Anyone have any suggestions (other than Argos?) :-)
If there's one near you an Ikea is always a good bet. They have a
business catalogue and love 'em or hate 'em theres a good choice...
RE: FN-FORUM: telephony systems
date posted 8th August 2003 11:30
I have much experience with these www.elmeg.co.uk start at about £200,
can supply and install if you like :)
Chaz.
> From: Business A2Z [EMAIL REMOVED]
> Subject: FN-FORUM: telephony systems
>
>...
RE: FN-FORUM: Desks
date posted 8th August 2003 11:27
Buy a tabletop and legs grom IKEA?
Matt
---
Matt Edwards
Senior Designer
Victor Chandler Worldwide
e: [EMAIL REMOVED]
t: +44 (0)2072 920064
f: +44 (0)2072 920055
m: +44 (0)7973 449489=20
=20
> -...
RE: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 11:22
Deb C wrote:
> Ah yes I remember the days when a place by the window was way more
> important then getting a seat. The filth of the underground on ones
> face. Leaving the house perfectly pruned and t...
FN-FORUM: telephony systems
date posted 8th August 2003 11:21
can anyone recommend a cost effective telephony system? out going calls mostly.
Andrew...
FN-FORUM: Desks
date posted 8th August 2003 11:20
I've been looking at getting a new desk recently, but they all seem a
little small for what I need. I'm looking for something that can handle
not just a desktop PC, monitor and speakers, but also h...
Re: FN-FORUM: Balloon printing - OT now
date posted 8th August 2003 11:18
> There are some people here with a Sense of Humour. Truly bizarre, you can
> only imagine being hammered and finding yourself in a cellar full of shiny
> MM helium balloons, I know not whether these...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 11:18
Lists wrote:
> All 0s is better. The 1s get stuck in the bends in the cable.
>
*lol* You'll be a fan of John Cage's 4'33" then...
Paul.
---
Outgoing mail is certified Virus Free.
Checked by AVG an...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 11:13
Nick B wrote:
> Forgive me if I'm wrong, but this crazy 'complexity reduction' sounds
> a whole lot like taking the digital representation of the audio (we
> can still LOOK at it as text, binary, hex,...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 11:12
> Like hell they have. They've got a call centre in India staffed by local
pub
> pop quiz winners. It's far cheaper.
lol...
RE: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 11:10
>But you must *surely* miss the Tube, especially when the weather is +30
>Dec C. You know how it is, the doors open and that surge of superheated
>air beckons temptingly.
Ah yes I remember the days...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 11:08
All 0s is better. The 1s get stuck in the bends in the cable.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Kathy
http://www.vendetta.co.uk
+44(0)7005 982 261
DNRC Mini...
RE: FN-FORUM: Compiled Help Files
date posted 8th August 2003 11:07
On 08 August 2003 11:12, Carl W Crawley [EMAIL REMOVED] wrote:
>
> I remember the ms HTML help compiler - is it a freebie and if so, where can
> you download it from?
>
Download free at
http:...
Re: FN-FORUM: Compiled Help Files
date posted 8th August 2003 11:06
You can use the free MS tool (HTML Help workshop) or I'll do them for you in
RoboHelp (cheap). It's my job ;-)
Webworks is wonderful (if you use Framemaker) and Authorit probably does the
cleanest co...
Re: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 11:03
PAMELA WHITTAKER wrote:
> You are lucky - my bus service stops around 6pm - Pam
I'm just waiting for the missus to drag me to the wild north of Scotland
where the bus services stop on Tuesday...
H...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 11:03
Craig Tinson wrote:
> Imagine converting an mp3 into a wav and loading it into a wav
> editor.. you will see a waveform.. there must be a mathematical way
> of converting that waveform into a unique n...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 11:02
>>Can anyone come up with a theory on how to "convert an mp3 into a
>>number"? I know that sounds weird so I'll explain what I mean...
surely it IS a number, eg a 4 meg mp3 (or any file) is just a 838...
Re: FN-FORUM: Balloon printing
date posted 8th August 2003 11:00
on 8/8/03 10:16 am, [EMAIL REMOVED] at [EMAIL REMOVED] wrote:
>
> On Fri, Aug 08, 2003 at 10:10:13AM -0000, Carla Boulton wrote:
>> If the same bloke still runs it, I met him in a club years ago, ba...
Re: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 10:58
You are lucky - my bus service stops around 6pm - Pam
----- Original Message -----
From: "Charlotte Owen" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Friday, August 08, 2003 10:38 AM
Subject: RE: FN-FO...
Re: FN-FORUM: Americanising textMOre info
date posted 8th August 2003 10:56
Sorry, I was on a client site in Leeds all day.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Kathy
http://www.vendetta.co.uk
+44(0)7005 982 261
DNRC Minister for Usefu...
Re: FN-FORUM: Balloon printing
date posted 8th August 2003 10:55
I have just seen a balloon printing shop at UKShop Search
http://www.balloon-printing.com.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Kathy
http://www.vendetta.co.uk
+4...
Re: FN-FORUM: Balloon printing
date posted 8th August 2003 10:48
On Fri, Aug 08, 2003 at 10:10:13AM -0000, Carla Boulton wrote:
> If the same bloke still runs it, I met him in a club years ago, back at his
> house he had hundreds of Mickey Mouse helium balloons in...
Re: FN-FORUM: Compiled Help Files
date posted 8th August 2003 10:45
> All of the tools I've seen are also for creating the html help files. If
> you already have them in html format, you just need to create a microsoft
> html help project and use the ms html help co...
Re: FN-FORUM: Balloon printing
date posted 8th August 2003 10:43
on 8/8/03 10:06 am, Andy Macnaughton-Jones at [EMAIL REMOVED] wrote:
>
> Hi,
> I need some balloons printing (about 500) within the next week. It's a
> simple green logo to go onto white balloons. A...
FN-FORUM: Oracle GL Business Consultant urgently sought
date posted 8th August 2003 10:42
Thought someone here might be interested, I have no connection to the role,
so please contact as per below.
Regards
Elizabeth
-------------
If you are an International Oracle GL expert, then the...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 10:40
on 8/8/03 10:01 am, Andy Stafford at [EMAIL REMOVED] wrote:
>> www.shazam.com has developed some sort of fingerprinting technology that
>> means that they store data on over a million songs and if yo...
Re: FN-FORUM: Balloon printing
date posted 8th August 2003 10:40
On Fri, Aug 08, 2003 at 10:05:16AM -0000, Andy Macnaughton-Jones wrote:
>
> Hi,
> I need some balloons printing (about 500) within the next week. It's a
> simple green logo to go onto white balloon...
FN-FORUM: Balloon printing
date posted 8th August 2003 10:38
Hi,
I need some balloons printing (about 500) within the next week. It's a
simple green logo to go onto white balloons. Any suggestions where
online or where cheap can do them ?
Cheers
Andy...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 10:34
> www.shazam.com has developed some sort of fingerprinting technology that
> means that they store data on over a million songs and if you're in a shop
> or near a radio or whatever you can dial their...
Re: FN-FORUM: CD Ripper
date posted 8th August 2003 10:25
Hi everyone. I've finally decided to un-lurk around here..
I like Easy CD-DA Extractor (version 6 now!). Trial version totally
useable:
http://www.poikosoft.com/easycdda.html
It's fast, has more f...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 10:23
If all you want is a fingerprint of the file file, then just use
something like md5sum. And it works on any file ... not just mp3s.
Dave.
On Fri, 2003-08-08 at 10:43, Niina Talikka wrote:
> Craig wr...
Re: FN-FORUM: Compiled Help Files
date posted 8th August 2003 10:21
> Does anyone have a recommendation on what program I can use to compile the
> finished HTML pages in? I haven't created .chm files for so long, I've
> forgotten which ones are the best.
All of the t...
RE: FN-FORUM: moving data offshore
date posted 8th August 2003 10:17
As far as I remember (and it=92s a year or so since I read the DPA) =
taking the
server off-shore will not change the DPA registration requirements =
because
it has some wording such as "Processed" in...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 10:16
Craig wrote:
>Can anyone come up with a theory on how to "convert an mp3 into a
>number"? I know that sounds weird so I'll explain what I mean...
Depends on what your intention is for using the numbe...
RE: FN-FORUM: Compiled Help Files
date posted 8th August 2003 10:13
I used roboHelp years ago but that worked from Word - I suspect they've
updated it since but I found it very good....
RE: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 10:11
> But you must *surely* miss the Tube, especially when the weather is
> +30 Dec C. You know how it is, the doors open and that surge of
> superheated air beckons temptingly.
::sniffle:: You've made m...
FN-FORUM: Compiled Help Files
date posted 8th August 2003 10:05
Hi All,
I'm just in the process of writing a manual for an application we've just
built for a client - and I'm going to do them as Compiled Help Manuals
(*.chm).
Does anyone have a recommendation on...
RE: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 10:03
I was having a beer with a lawyer (sorry....solicitor) last night and he =
was
telling me of the nightmare scenario of foreign solicitors acting =
everywhere
in the uk in courts etc, it looks like tha...
RE: FN-FORUM: Unsual idea...
date posted 8th August 2003 10:00
> Surely whether its and mp3 or wav its already stored as a=20
> string of numbers?
In theory it is already stored as a string of 0's and 1's. In practice =
it is
stored in numbers, letters and symbo...
RE: FN-FORUM: Unsual idea...
date posted 8th August 2003 09:56
You could also look at fractal compression which gives some very
interesting results for images - showing detail that isn't in the
original image but is actually present in the real world. Very bizzar...
RE: FN-FORUM: Unsual idea...
date posted 8th August 2003 09:46
Rus.. very interesting...
I've just loaded an mp3 into cool edit pro.. and (this is impressive, I
didn't know CEP could do this) saved it out as a .txt file.. when I open
that it looks like a very ve...
Re: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 09:45
Deborah Causton wrote:
> precisely one of the reasons I got out, I'm now enjoying, cheaper rent
> (closer to the city centre), cheap petrol, cheap fags, cheap booze,
> reliable public transport, g...
RE: FN-FORUM: Unsual idea...
date posted 8th August 2003 09:30
Well it is essentially a set of numbers already, so at its simplest level
you could just read the file and convert each byte to a number. Other than
that I am afraid my signal processing capabilities...
Re: FN-FORUM: Unsual idea...
date posted 8th August 2003 09:29
On Fri, 8 Aug 2003, Craig Tinson wrote:
>
> Guys...
>
> I've had an idea for a "play project" I can work on at home in my spare
> time.. but before I start on it I need a few ideas..
>
> Can anyone c...
RE: FN-FORUM: Unsual idea...
date posted 8th August 2003 09:28
Surely whether its and mp3 or wav its already stored as a string of
numbers?
Chaz.
> From: Craig Tinson [EMAIL REMOVED]
>
>
> Guys...
>
> I've had an idea for a "play project" I can work on at h...
FN-FORUM: Unsual idea...
date posted 8th August 2003 09:22
Guys...
I've had an idea for a "play project" I can work on at home in my spare
time.. but before I start on it I need a few ideas..
Can anyone come up with a theory on how to "convert an mp3 into a...
Re: FN-FORUM: Braking into Freelance
date posted 8th August 2003 09:12
Andrew Wilson wrote:
> ....and learn to use a spell checker....unlike most who have answered this
> thread!! :))
mine doesn't work before 9am
--
Darren Beale - Acksys Ltd
http://www.acksys.co.uk...
RE: FN-FORUM: Damn M-F Spammers!
date posted 8th August 2003 09:11
Yeah, trouble with this is that there are people at the other end of SPAM
sometimes. I once responded, for no particular reason, with 'f**k off' to a
spammer.
They very kindly responded by making my...
RE: FN-FORUM: Braking into Freelance
date posted 8th August 2003 09:07
....and learn to use a spell checker....unlike most who have answered this
thread!! :))
Andrew
_________________________
Andrew Wilson Productions
Web Design & Hosting - Print Design - Graphics - Mu...
RE: FN-FORUM: Americanising textMOre info
date posted 8th August 2003 09:06
Exactly what happened! Well I changed the global language settings in
regional settings, restarted the machine - but it didn't!! Well I got into
safe mode, changed the settings back and it still refus...
Re: FN-FORUM: Damn M-F Spammers!
date posted 8th August 2003 09:01
on 8/8/03 8:13 am, John Kyle at [EMAIL REMOVED] wrote:
> Why don't you follow the link, find their admin/sales email address and if
> you have a broadband address write a script to send them billions...
RE: FN-FORUM: Americanising textMOre info
date posted 8th August 2003 09:00
Thanks Kathy - wish you had answered my email yesterday lol - of course I
kept trying to reset the language in options and in spell checker. Didn't
occur to me to change it in the style sheet - ah wel...
RE: FN-FORUM: CD Ripper
date posted 8th August 2003 08:56
Free Rip is nice, but a tiny bit lacking in ID3 control.
http://www.mgshareware.com/frmmain.html
charlie.
- -
"charlie owen is certainly well travelled" - googlism.com
Personal site: http://subducti...
Re: FN-FORUM: Damn M-F Spammers!
date posted 8th August 2003 08:56
John Kyle wrote:
> Why don't you follow the link, find their admin/sales email address and if
> you have a broadband address write a script to send them billions of email
> and if your own email addr...
RE: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 08:49
> House prices, petrol, food, council tax, VAT, income tax, NI
increases, high rental prices, more expensive cars, high vehicle excise
duties, inheritance tax, corporation tax, crap public services, o...
Re: FN-FORUM: Damn M-F Spammers!
date posted 8th August 2003 08:45
Why don't you follow the link, find their admin/sales email address and if
you have a broadband address write a script to send them billions of email
and if your own email address is on a spam list it...
RE: FN-FORUM: Braking into Freelance
date posted 8th August 2003 08:45
Remember as soon as you start "earning" you need to come off the dole, =
might
be a better idea to stay on the dole for a while and do FREE work for =
local
orgs to get a portfolio of some sort and al...
Re: FN-FORUM: Braking into Freelance
date posted 8th August 2003 08:39
on 8/8/03 4:01 am, John Sampson at [EMAIL REMOVED] wrote:
>
> Hello All
> I'm new to this list, and I'm sure you get this a lot, but after a few weeks
> of perusing freelancers.net I decided I am go...
RE: FN-FORUM: Americanising textMOre info
date posted 8th August 2003 08:38
Wow! Never heard of that happening before. I'm using XP and it's a
simple transition. Can I ask exactly what happened, what you did? Did
you try to just change your default language settings. It's bee...
Re: FN-FORUM: Braking into Freelance
date posted 8th August 2003 08:17
John Sampson wrote:
> I am under the impression (probably wrongly) that getting a site done or
> content written for another company is probably a little bit eaiser than
> trying to do my own site -...
RE: FN-FORUM: Damn M-F Spammers!
date posted 8th August 2003 08:01
One of my domains was hammered like this last year. There seems to be very
little that you can do about the spoofing apart from not replying or opening
any of this junk.
Remove the catchall off your d...
Re: FN-FORUM: EU seeks to Destroy EU IT jobs
date posted 8th August 2003 07:49
Alan Sheppard wrote:
> Don't see the any change from our existing governments policy on "Fast
> Tracking" every Tomacwezki, Dickheadia and Hari who's simply seen a PC into
> London, since this act...
FN-FORUM: Braking into Freelance
date posted 8th August 2003 04:33
Hello All
I'm new to this list, and I'm sure you get this a lot, but after a few weeks
of perusing freelancers.net I decided I am gonna take the plunge and get
stuck in.
I am under the impression (pr...
FN-FORUM: Damn M-F Spammers!
date posted 8th August 2003 04:14
Dear All,
I am receiving a number of returned emails from lots of random people,
apparently sent out from [EMAIL REMOVED] (replace * with some
random junk). The returned email attached is for some sh...
Re: FN-FORUM: Javascript help....
date posted 8th August 2003 02:58
On Thursday 07 Aug 2003 11:39 pm, Richard Parratt wrote:
> Of course, the *proper* way to do things would be to have a method:
> =09function IsIE4() { return !navigator && version=3D=3D4 }
Having th...
Re: FN-FORUM: Americanising textMOre info
date posted 8th August 2003 00:03
You probably just need to modify your normal style to use US as the language
(either for that document or make a template and base US docs on the new
template). That's what I do.
++++++++++++++++++++...
|
|