Freelancers Forum Messages on Wednesday May 24th 2006
Re: FN-FORUM: OT : XP Themes
date posted 24th May 2006 22:55
Try http://www.wincustomize.com
On 24 May 2006, at 11:53, Ciaron wrote:
>
> Looking a new theme for Windows XP, I don't like the XP theme and
> bored of
> looking at a grey interface, can anyone...
Re: FN-FORUM: Gill Sans Fonts
date posted 24th May 2006 22:02
Darren Foster wrote:
> Hi All,
>
> I'm after a resource to get the entire family of fonts belonging to Gill
> Sans especially the Gill Sans Light and Gill Sans Bold fonts.
>
> Of coarse being the chea...
Re: FN-FORUM: Homepage
date posted 24th May 2006 21:58
I thought sandboxing had now gone? And can you explain more about the
"dropoff" please!
BTW - Are / were you with goggle?
TIA...
Mike A.
Dynamic Developer wrote:
> This is just between me and you,...
RE: FN-FORUM: Homepage
date posted 24th May 2006 21:17
This is just between me and you, but I think it's their way of giving peeps
a gentle nudge to start an adword campaign. The sandbox... and the 'dropoff'
(site drops off high rank after a few weeks.)...
RE: FN-FORUM: Homepage
date posted 24th May 2006 21:09
My advice would be to use the other players (MSN and Yahoo) for checking
backlinks. Although google enjoys a large share of the market, Yahoo and MSN
are better for certain things. Imho.
If one engi...
Re: FN-FORUM: Exchange rates
date posted 24th May 2006 21:01
The european central bank offers an XML feed of exchange rates for the
Euro and the US federal reserve does a similar one for the US dollar (In
fact most national banks seem to).
Just a matter of se...
Re: FN-FORUM: Ebay
date posted 24th May 2006 20:20
Apologies Dom, not too well stated by me.
In commercial terms, by generic I mean a standard. Postcript became a
standard for laser printers and so lots of people wrote a lot of software to
interface...
Re: FN-FORUM: (OT) MICROSOFT WORD USERS - URGENT - PLEASE READ AND TAKE THE APPROPRIATE ACTION.....
date posted 24th May 2006 20:12
On Wed, May 24, 2006 at 08:03:42PM -0000, Gerard McGovern wrote:
>
> > > If you use MS Word on a PC then please read the following:
> > >
> > > http://news.zdnet.co.uk/internet/security/0,39020375,3...
Re: FN-FORUM: Exchange rates
date posted 24th May 2006 20:11
Hi Rob,
Thanks for the info, unfortunately my client requires proper code
written to suit his needs. He also wants an automatic feed for exchange
rate.
I might have to tell my client that he will...
FN-FORUM: Gill Sans Fonts
date posted 24th May 2006 20:08
Hi All,
I'm after a resource to get the entire family of fonts belonging to Gill
Sans especially the Gill Sans Light and Gill Sans Bold fonts.
Of coarse being the cheap skate that I am I would prefe...
FN-FORUM: Gill Sans Fonts
date posted 24th May 2006 20:07
Hi All,
I'm after a resource to get the entire family of fonts belonging to Gill
Sans especially the Gill Sans Light and Gill Sans Bold fonts.
Of coarse being the cheap skate that I am I would prefe...
RE: FN-FORUM: (OT) MICROSOFT WORD USERS - URGENT - PLEASE READ AND TAKE THE APPROPRIATE ACTION.....
date posted 24th May 2006 20:01
> > If you use MS Word on a PC then please read the following:
> >=20
> > http://news.zdnet.co.uk/internet/security/0,39020375,39270491,00.htm
>=20
> Why wait 'till 19 June a fix is available now. Use...
Re: FN-FORUM: Problem with qmail
date posted 24th May 2006 19:48
> Can any of you technical bods point me in the right direction here
> please?
Have you tried without the preline?
e.g. | /my/script.php
Do you have the php shebang in your script? e.g. #!/usr/bin/...
Re: FN-FORUM: Ebay
date posted 24th May 2006 19:40
On Wednesday 24 May 2006 6:44 pm, Mike A wrote:
> Epson printers are branded printers but epson printers are now generic.=
=20
Has anybody here *ever* heard someone use "epson" in a generic sense?...
RE: FN-FORUM: SQL statement question
date posted 24th May 2006 19:27
The=20
select product, min(option) from table group by product =20
is your best option.
Distinct will only return distinct rows and using a sub-query *may* not
be available or *may* cause thigns to...
FN-FORUM: Problem with qmail
date posted 24th May 2006 19:07
Hi,
I wonder if anyone can help with this please. I have spent all day
googling and trying out various changes all to no avail. I am tearing
my hair out - what's left of it!
I am trying to trigger...
Re: FN-FORUM: Exchange rates
date posted 24th May 2006 18:38
Lee Fogarty wrote:
> I have a client that wants to list items in a shop in Euros, but wants
> the items to be displayed in Euros, Sterling & Dollars without having to
> manually update a table each...
Re: FN-FORUM: (OT) MICROSOFT WORD USERS - URGENT - PLEASE READ AND TAKE THE APPROPRIATE ACTION.....
date posted 24th May 2006 18:35
> Why wait 'till 19 June a fix is available now. Use OpenOffice, it is
> compatible with MS Word, free & runs on multiple platforms:
Unfortunately it also doesn't support comments, which recently led...
RE: FN-FORUM: (OT) MICROSOFT WORD USERS - URGENT - PLEASE READ AND TAKE THE APPROPRIATE ACTION.....
date posted 24th May 2006 18:30
>On Wed, May 24, 2006 at 06:20:54PM -0000, Darren Foster wrote:
>>=20
>> If you use MS Word on a PC then please read the following:
>>=20
>> http://news.zdnet.co.uk/internet/security/0,39020375,392704...
RE: FN-FORUM: Exchange rates
date posted 24th May 2006 18:27
Lee Fogarty wrote:
> I'm a busy bunny today!
>
> I have a client that wants to list items in a shop in Euros, but
> wants the items to be displayed in Euros, Sterling & Dollars without
> having to ma...
Re: FN-FORUM: (OT) MICROSOFT WORD USERS - URGENT - PLEASE READ AND TAKE THE APPROPRIATE ACTION.....
date posted 24th May 2006 18:25
On Wed, May 24, 2006 at 06:20:54PM -0000, Darren Foster wrote:
>
> If you use MS Word on a PC then please read the following:
>
> http://news.zdnet.co.uk/internet/security/0,39020375,39270491,00.htm...
RE: FN-FORUM: Exchange rates
date posted 24th May 2006 18:20
> I have a client that wants to list items in a shop in Euros,
> but wants the items to be displayed in Euros, Sterling &
> Dollars without having to manually update a table each day.
>
> Does anyo...
FN-FORUM: (OT) MICROSOFT WORD USERS - URGENT - PLEASE READ AND TAKE THE APPROPRIATE ACTION.....
date posted 24th May 2006 18:19
If you use MS Word on a PC then please read the following:
http://news.zdnet.co.uk/internet/security/0,39020375,39270491,00.htm
Basically there has been a new security problem with Microsoft Word an...
Re: FN-FORUM: Exchange rates
date posted 24th May 2006 18:13
On Wed, May 24, 2006 at 06:07:06PM -0000, Lee Fogarty wrote:
>
> I'm a busy bunny today!
>
> I have a client that wants to list items in a shop in Euros, but wants
> the items to be displayed in Eu...
FN-FORUM: Exchange rates
date posted 24th May 2006 18:05
I'm a busy bunny today!
I have a client that wants to list items in a shop in Euros, but wants
the items to be displayed in Euros, Sterling & Dollars without having to
manually update a table each...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 18:03
> ... then wait for your client to finalise their requirements.
That's easier said than done, as I'm sure you're aware.
As for normalization, I'm capable of turning an information systems
problem in...
Re: FN-FORUM: Homepage
date posted 24th May 2006 17:47
Submit site details and articles to Technorati and the like so Google
backlinks them at a very early stage. Doing this I was astonished to see an
article from one of my developments, and the site, lis...
Re: FN-FORUM: Homepage
date posted 24th May 2006 17:43
Google are definitely off my christmas list
They don't recognise most links to my sites (except from my own sites)
and to top that off they have just dropped majority of the pages in my
training sit...
Re: FN-FORUM: Ebay
date posted 24th May 2006 17:42
First off, I'm ex-Epson: first had a distributorship then in the early-mid
'80s went to Epson to set up and manage Scotland and Northern Ireland (head
hunted).
At the time they had a big thing about...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 17:25
On Wed, 24 May 2006, Tom Allen wrote:
> Yeah, that would be one way of doing it. I'm just trying to make it
> as easy as possible as the client keeps changing their
> requirements....
... then wait...
FN-FORUM: secpay.com
date posted 24th May 2006 17:21
Hi all,
Has anyone used these guys? Any good bad experiences?
People keep complaining about Paypal in particular about locking =
accounts
that exceeded certain amount of money. Also, they charge qui...
RE: FN-FORUM: Homepage
date posted 24th May 2006 17:19
So what's your advice on getting google to display them...?!
-----Original Message-----
From: Dynamic Developer [EMAIL REMOVED]
Sent: 24 May 2006 18:16
To: FN-FORUM / [EMAIL REMOVED]
Subject: RE: FN...
RE: FN-FORUM: Homepage
date posted 24th May 2006 17:14
Hi guys.
As industry pros, we should curb the love affair with google. For the
purpose of finding backlinks, google is usually incomplete. Try Yahoo or
MSN, you'll probably get different (more accu...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 17:11
Dave hit the nail on the head with regard to the problem itself.
> Thinking about it, the reason why this is so hard is that your
> database isn't normalised. You really need a 'products' table and a...
Re: FN-FORUM: Ebay
date posted 24th May 2006 17:08
Lee Fogarty wrote:
>
> My Sister has listed some epson compatible ink cartridges on ebay that
> were given to a charity she helps with.
>
> Today, she has received an email from epson demanding that...
RE: FN-FORUM: Homepage
date posted 24th May 2006 17:03
It can take a few months before the google bots find the link (if they're
indexing the sites that link to yours that is).
How long ago were the links made?
Those sites haven't been indexed yet, by the...
RE: FN-FORUM: Homepage
date posted 24th May 2006 16:58
Cheers Ian for the speedy reply.
I have many sites linking but they don't register on Google
For example:
www.fotosource.co.uk
www.storageking.co.uk
Stuck!
Anthony
-----Original Message-----
Fr...
RE: FN-FORUM: Ebay
date posted 24th May 2006 16:52
Is there other epson compatible cartridges on there rather than actual
epson=3F
Also, get her to ask ebay why the listing was removed=2E
And if she used the official description from the epson site th...
RE: FN-FORUM: Homepage
date posted 24th May 2006 16:50
You have 1 site linking to you and that's it according to google:
http://www.countrywidewaste.co.uk/contact.php
Try to get some more
-----Original Message-----
From: Anthony [EMAIL REMOVED]
Sent:...
FN-FORUM: Ebay
date posted 24th May 2006 16:46
My Sister has listed some epson compatible ink cartridges on ebay that
were given to a charity she helps with.
Today, she has received an email from epson demanding that she removes
the auction, an...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 16:45
You wrote:
If anyone wants advice then please contact me off list, and if I don't
like you I will be sending the boys round for a chat...... ;)
The girls as well?
DG
----- Original Message -----...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 16:43
Thanks for all the comments.
To clear up - I am only a developer. I won't be putting my name to the
code or the site. Sometimes needs must :)
The site is not charging people to register. Registra...
Re: FN-FORUM: LTD company
date posted 24th May 2006 16:39
I didn't say I didn't like then - I think they a lovely - especially
piglets. It is just that a lot of them together are a a bit smelly to say
the least and it is the smell I don't like not the pigs...
FN-FORUM: Homepage
date posted 24th May 2006 16:24
Hi
Any ideas why I have page rank 1 on my home page, when other pages have 2 or
3. Thanks.
www.lme.ltd.uk
Anthony
Web Designer
(t) 01952 25 24 23
(f) 01952 25 24 22
(w) www.lme.ltd.uk...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 16:12
sorry for my unhelpfull input - should have read the whole thread first..
;o)...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 16:12
Quoting Tom Allen [EMAIL REMOVED]
> I have a table of products, each of which has a unique PK and a load
> of other fields, including a Catalogue Number. This is not unique,
> however; there can be...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 16:08
Quoting Tony Crockford [EMAIL REMOVED]
>
> Tom Allen wrote:
>>
>>> does SELECT TOP 1 * FROM Products WHERE CategoryId=21 work
>>
>> That only returns the first result. I'm trying to eliminate rows i...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 16:01
Hi,
> > does SELECT TOP 1 * FROM Products WHERE CategoryId=21 work
>
> That only returns the first result. I'm trying to eliminate rows in
> which the Catalogue Number is repeated, so that only the...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 15:56
On Wed, 2006-05-24 at 15:07 +0000, Tom Allen wrote:
> What I need to do is select a list of products in a particular
> category, i.e.
>
> SELECT * FROM Products WHERE CategoryId=21
>
> However, I wa...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 15:56
it's a tricky one.
you can create a temporary table from your SELECT DISTINCT statement
which will contain only one copy of each Catalogue Number,
then select TOP 14 * from the temporary table.
it s...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 15:54
Quoting [EMAIL REMOVED]
> select *
> from Products p
> where CategoryId = 21
> and OptionCode =
> (select min(OptionCode)
> from test
> where Catalog...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 15:53
Cheers Kathy, all sorted now though, managed to sort a script out
(cheers dave b)
Works like a dream :)
Ciaron.
Lists wrote:
> Why not use ntbackup? That will run from task scheduler or a batch fi...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 15:48
Tom Allen wrote:
>
>> does SELECT TOP 1 * FROM Products WHERE CategoryId=21 work
>
> That only returns the first result. I'm trying to eliminate rows in
> which the Catalogue Number is repeated, so...
RE: FN-FORUM: LTD company
date posted 24th May 2006 15:45
Do be aware, though, that anything you *still have outstanding at end of
year* as a Director's Loan will now be "deemed" to be income and subject to
PAYE/NIC... At least that's what my accountant told...
Re: FN-FORUM: copyright
date posted 24th May 2006 15:44
> company wants to stop other people developing a similar type of =
> software to interface with this datasource. Is this possible? or is i=
t =
> an open gamefield once the software is released...
Re: FN-FORUM: Mial Client
date posted 24th May 2006 15:44
> any recommendations for a decent mail cleint with network capabilities=
?
> Not outlook. I looked at pegasus a while back but don't want to use i=
t.
Opera's built-in mail is different: it databas...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 15:42
Quoting Tom Allen [EMAIL REMOVED]
> Hi,
>
> I have a quick SQL problem that I can't solve:
>
> I have a table of products, each of which has a unique PK and a load
> of other fields, including a Cata...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 15:39
I prefer All-way Sync (there is a free version).
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Kathy
http://www.vendetta.co.uk
+44(0)7005 982 261
DNRC Minister for Usef...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 15:38
Why not use ntbackup? That will run from task scheduler or a batch file
I would use Robocopy (from the free Resource Kit tools) in a batch file, or
just use good old xcopy (which can now copy ACLs as...
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 15:33
> does SELECT TOP 1 * FROM Products WHERE CategoryId=3D21 work
That only returns the first result. I'm trying to eliminate rows in
which the Catalogue Number is repeated, so that only the first entr...
Re: FN-FORUM: LTD company
date posted 24th May 2006 15:32
Aww Pam! Pigs are quite nice (unless they bite), especially the Berkshire
Tamworth - a lovely ginger pig.
Not as nice as goats, perhaps.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++...
Re: FN-FORUM: LTD company
date posted 24th May 2006 15:29
It's usual to run a director loan account. That way either the company
borrows from you, the director, by not paying your wages, or you borrow from
the company by taking wages or bonus in advance. In...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 15:27
Alan Lloyd wrote:
>
> On 24 May 2006 15:02:00 -0000, Catherine Hutchinson
> [EMAIL REMOVED] wrote:
>>
>> Have I missed a post here? The original question was about an 'adult
>> site', he hinted at th...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 15:25
Mike A wrote:
> Alan,
>
> Unless commenting in a rare on-list moment of mirth, always obvious or
> stated, I do not comment about matters unless I have direct experience or
> knowledge.
>
> There are...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 15:25
On 24 May 2006, at 10:46, Mike A wrote:
> There are well organised and serious entities who have interests in
> controlling escort and prostitution business.
Based on the original email, it seemed...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 15:19
The reference came from here...
Faded Halo Industries wrote:
> I was asked to do some sites for some escort agencies... That was at
> least until my princes trust mentor came in and kicked the idea t...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 15:18
Quoting Alan Lloyd [EMAIL REMOVED]
> People see the 'adult site' bit, the blinkers come down and out comes
> the crap....
All this and coprophilia too :)
Dave......
Re: FN-FORUM: SQL statement question
date posted 24th May 2006 15:14
does SELECT TOP 1 * FROM Products WHERE CategoryId=21 work
----- Original Message -----
From: "Tom Allen" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Wednesday, May 24, 2006 4:07 PM
Subject: FN-FORUM...
Re: FN-FORUM: copyright
date posted 24th May 2006 15:13
I think I understand, and I think you're correct.
Once it's out in the open, it's open to be copied.
To be honest (and I've explored the copyright and patent route)...
Having a patent is the best w...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 15:11
On 24 May 2006 15:02:00 -0000, Catherine Hutchinson
[EMAIL REMOVED] wrote:
>
> Have I missed a post here? The original question was about an 'adult
> site', he hinted at the fact it would be selling s...
FN-FORUM: SQL statement question
date posted 24th May 2006 15:05
Hi,
I have a quick SQL problem that I can't solve:
I have a table of products, each of which has a unique PK and a load
of other fields, including a Catalogue Number. This is not unique,
however; t...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 14:59
Have I missed a post here? The original question was about an 'adult
site', he hinted at the fact it would be selling sex toys - where has
prostitution come from?
Mike A wrote:
> Alan,
>
> Unless c...
Re: FN-FORUM: LTD company
date posted 24th May 2006 14:54
Or a converted Barn as a House. There are plenty around
Pam
----- Original Message -----
From: "Ian Copeland" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Wednesday, May 24, 2006 3:48 PM
Subject: RE...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 14:54
On 24 May 2006 14:47:18 -0000, Mike A [EMAIL REMOVED] wrote=
:
>
> Alan,
>
> Unless commenting in a rare on-list moment of mirth, always obvious or
> stated, I do not comment about matters unless I ha...
RE: FN-FORUM: LTD company
date posted 24th May 2006 14:47
Get a room
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED]
Sent: 24 May 2006 15:45
To: FN-FORUM / [EMAIL REMOVED]
Subject: Re: FN-FORUM: LTD company
I don't know Devon very well b...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 14:45
Alan,
Unless commenting in a rare on-list moment of mirth, always obvious or
stated, I do not comment about matters unless I have direct experience or
knowledge.
There are well organised and serious...
Re: FN-FORUM: LTD company
date posted 24th May 2006 14:43
I don't know Devon very well but I have been a few times. I was such an
unusual name to choose that I have been dying to ask for ages. I am Country
born and breed and I would love to live on a Farm...
RE: FN-FORUM: LTD company
date posted 24th May 2006 14:31
Is Branson a virgin? ... of course I live on a farm!
No - sorry Pam - I don't, not yet but I aim to in the next 5 years - move a
couple of miles out of town into the rolling hills ...
Do you know D...
Re: FN-FORUM: copyright
date posted 24th May 2006 14:31
david,
thanks for the reply that , you are right i am a bit confused in this area.
here is the scenario:
company has devloped some web software which does an innovative and specific
task and works...
Re: FN-FORUM: LTD company
date posted 24th May 2006 14:23
I am curious - why "Pig Farmer"? Do you live on a Farm?
Pam...
Re: FN-FORUM: copyright
date posted 24th May 2006 14:22
I'm not sure if I understand, but you might be confusing copyright and
patent.
Anything that is produced, as in a picture, song, web page, whatever,
automatically gains copyright protection and is...
RE: FN-FORUM: LTD company
date posted 24th May 2006 14:07
Thanks for all the answers guys - particularly interested in your line =
on
contract hiring the car David.
I bought a brand new Audi A4 in May 2004 when I started a new job (the =
first
time ever I o...
FN-FORUM: copyright
date posted 24th May 2006 13:58
i think this has been discussed before. but i couldnt ifnd anything specific
can an idea be copyrighted.. even tho it is at the final production / live
stage (web service) can it be copyrighted for...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 13:52
On 24 May 2006 12:29:10 -0000, Mike A [EMAIL REMOVED] wrote=
:
>
> Faded Halo Industries wrote:
> > I would be careful though as I was told that some of these types can
> > be mob run.. And they don't...
Re: FN-FORUM: LTD company
date posted 24th May 2006 13:50
This is good advice if, it can be proven it covers all your cost of living
expenses.
Monthly Cost to you for:
Rent Mortgage
Gas/electric (other utilities)
Food
Clothing
Phone
Car expenses
Just calcu...
Re: FN-FORUM: Setting up company with someone else - what to consider?
date posted 24th May 2006 13:30
LEEEEEEEEEEEEET MEEEEEEEEEE SEEEEEEEEE,
Where to begin, business venture with unknown partners, and you will be
doing all the work? what do you need to iron out. How about who handles the
cash, how...
RE: FN-FORUM: LTD company
date posted 24th May 2006 13:27
< I have been meaning to bend your ears with this for a bit now. The Pig
Farmer Designs went Ltd company last month and all is well but there is one
thing I am still a bit unsure of ... drawing pay.>...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 13:20
Lee Fogarty wrote:
>
> Hello again folks.
>
> I've been asked to develop an adult site. I don't have much experience
> with these sort of sites, so I am having to do some *ahem* research.
>
> I have...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 13:19
Yep, sounds good, cheers for that!
Ciaron.
Rob Powell wrote:
>
>> Cheers, that's exactly what was looking for. Many thanks!
>>
>
> I use a script much like the one that Dave suggested to you...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 13:16
And when you have read all this, then decide to withdraw tell us and we will
all apply for the vacant position you leave behind....... GIVE ME A BREAK,
the guys building a website not working for MI...
RE: FN-FORUM: LTD company
date posted 24th May 2006 13:15
There are no rules about when you pay yourself, simply that when you do, you
pay any NICS/PAYE due for the period within which you actually pay
yourself... During the monthd that you don't pay yoursel...
Re: FN-FORUM: LTD company
date posted 24th May 2006 13:14
Quoting John 'Max' Maxwell [EMAIL REMOVED]
>
> Hi All,
>
> I have been meaning to bend your ears with this for a bit now. The Pig
> Farmer Designs went Ltd company last month and all is well but ther...
Re: FN-FORUM: LTD company
date posted 24th May 2006 13:09
My Accountant has put me on a mutaually agreed small fixed PAYE salary every
month which I take out proving I have enough in the Bank. Then at year end
they tell me if there is any extra money left...
Re: FN-FORUM: Setting up company with someone else - what to consider?
date posted 24th May 2006 13:05
Quoting Hugh [EMAIL REMOVED]
>
> I am about to set up a company with some other people I don't know all that
> well, friends of friends;
> one person is the creative thinker with the idea & some IT k...
Re: FN-FORUM: LTD company
date posted 24th May 2006 13:04
draw a min £500 a month and take the rest out as dividends (reduced tax
overall).. get your accountant (cheap these days) to sendy ou PAYE for the
£500 to calculate ni etc.
maybe speak to an acco...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 13:04
I started using it because it would copy more files(system files etc)
but xcopy is probably fine for you.
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/xcopy.mspx?mfr=...
FN-FORUM: LTD company
date posted 24th May 2006 12:53
Hi All,
I have been meaning to bend your ears with this for a bit now. The Pig
Farmer Designs went Ltd company last month and all is well but there is one
thing I am still a bit unsure of ... drawing...
RE: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:50
> Cheers, that's exactly what was looking for. Many thanks!
I use a script much like the one that Dave suggested to you.
Just thought I'd made a small suggestion on how you might extend the idea......
Re: FN-FORUM: Domain Question..
date posted 24th May 2006 12:50
Amarshi Mandalia wrote:
> I can do it for you as a reseller via Totalregistrations for £18 + vat per
> year for .com
>
> Transfer request is sent to your registrar and then to you to release the
> do...
Re: FN-FORUM: MySQL troubles
date posted 24th May 2006 12:48
On 24 May 2006 09:52:45 -0000, D D Glendinning [EMAIL REMOVED] wrote:
>
> SELECT c.* FROM lindoProducts c, lindoInstruments p, lindoCategories q
> WHERE p.categoryID=q.ID AND c.instID=p.ID AND c.activ...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 12:42
I'm gonna go all "Al Murray" in a minute.......
On 24/5/06 13:36, "Lee Fogarty" [EMAIL REMOVED] wrote:
>
> An axe is generally used to chop trees and occasionally teenagers limbs
> in tacky horror...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:42
Sorry just to elaborate on my short answer get xxcopy(use google) then
write a file.bat with "xxcopy *.* c:\destination dir\ da/e/c/h/k/y" inside.
Are there any benefits to using xxcopy over xcopy (...
Re: FN-FORUM: Information advice
date posted 24th May 2006 12:41
Ideal-Graphics ( Complete business design solution ) wrote:
> check this link www.ideal-graphics.co.uk/e-marketing.htm
> visual the next 6 options.
>
> this may help your marketing.
> cedric
Or go to...
Re: FN-FORUM: Setting up company with someone else - what to consider?
date posted 24th May 2006 12:37
Hugh,
As well as a partnership contract or having the pursuits of the business set
down in the memorandum and articles of a company, get a statement of a)
intention and b) liability. In other words s...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:34
Cheers, that's exactly what was looking for. Many thanks!
Ciaron.
Dave Boulden wrote:
> It most certainly is... Just use a USB Hard drive or memory drive which will
> appear as a normal hard drive....
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 12:34
An axe is generally used to chop trees and occasionally teenagers limbs
in tacky horror movies.
Hope that helps.
Ideal-Graphics ( Complete business design solution ) wrote:
> nice one
>
> so, eh eh...
RE: FN-FORUM: php appointment boking
date posted 24th May 2006 12:33
I concur
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of
Ideal-Graphics ( Complete business design solution )
Sent: 24 May 2006 13:30
To: FN-FORUM / [EMAIL REMOVED]
Subj...
Re: FN-FORUM: Information advice
date posted 24th May 2006 12:32
check this link www.ideal-graphics.co.uk/e-marketing.htm
visual the next 6 options.
this may help your marketing.
cedric
----- Original Message -----
From: "Mike A" [EMAIL REMOVED]
To: [EMAIL REMOVE...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 12:27
nice one
so, eh eh eh eh What is the an Axe's
----- Original Message -----
From: "Lee Fogarty" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Wednesday, May 24, 2006 3:45 AM
Subject: Re: FN-FORUM: php a...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 12:27
Faded Halo Industries wrote:
> I would be careful though as I was told that some of these types can
> be mob run.. And they don't like competition...Ha!
And if your client isn't mob run perhaps the c...
Re: FN-FORUM: Information advice
date posted 24th May 2006 12:19
Yellow pages. About £120 / 1,000 on CD/DVD or via online account. Expect a
high percentage of waste data. Also, BT DVD directory.
After allowing for all admin work your friend is probably going to f...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 12:15
Lists wrote:
> What's a "wheel"?
Kathy, as the forum exists for assisting those seeking help or explanation
I'll help on this one.
A wheel is a round object in a single plane. Designed specifically...
FN-FORUM: Setting up company with someone else - what to consider?
date posted 24th May 2006 12:14
I am about to set up a company with some other people I don't know all that
well, friends of friends;
one person is the creative thinker with the idea & some IT knowledge, his
wife is the admin type...
Re: FN-FORUM: Adult sites
date posted 24th May 2006 12:13
I was asked to do some sites for some escort agencies... That was at least
until my princes trust mentor came in and kicked the idea to the curb...
haha
I was told that US hosts were best to use, alt...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:08
Sorry just to elaborate on my short answer get xxcopy(use google) then
write a file.bat with "xxcopy *.* c:\destination dir\ da/e/c/h/k/y" inside.
double click file.bat and the fun begins :o)
Ju....
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:07
julian wrote:
>
> uhh yeah it's called a batch file (.bat) written using dos commands (or
> get xxcopy).
>
SyncToy is quite nice too if you like GUI things.
Regards,
Rob......
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:06
On Wed, 2006-05-24 at 11:45 +0000, Ciaron wrote:
> Hi,
>
> Is it possible to have a script in Windows XP (or server 2003) that will
> copy the contents of a directory to a backup device? Ideally I w...
RE: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:05
It most certainly is... Just use a USB Hard drive or memory drive which will
appear as a normal hard drive. Then just creat a batch script to copy the
directory to that drive. I do a similar thing for...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:01
You can knock together a VB script to do that.
Ciaron wrote:
>
> Hi,
>
> Is it possible to have a script in Windows XP (or server 2003) that
> will copy the contents of a directory to a backup devic...
Re: FN-FORUM: Windows Backup Script
date posted 24th May 2006 12:00
uhh yeah it's called a batch file (.bat) written using dos commands (or
get xxcopy).
Ciaron wrote:
>
> Hi,
>
> Is it possible to have a script in Windows XP (or server 2003) that will
> copy the...
FN-FORUM: Windows Backup Script
date posted 24th May 2006 11:43
Hi,
Is it possible to have a script in Windows XP (or server 2003) that will
copy the contents of a directory to a backup device? Ideally I want the
script to sit on the desktop so that it can be d...
Re: FN-FORUM: Information advice
date posted 24th May 2006 11:37
did you manage to sor this out?
andrew
Alan Milford wrote:
>
> Hi,
>
> I have a client asking about postal marketing, does anyone know
> anywhere where it is possible to find or buy lists of UK bu...
Re: FN-FORUM: Mial Client
date posted 24th May 2006 10:58
thunderbirds are away
Andrew
Mark Taylor wrote:
> Pegasus is the biggest pile of shit I have ever used so yes definitely don't
> use it.
>
> -----Original Message-----
> From: [EMAIL REMOVED] [EMAI...
FN-FORUM: Adult sites
date posted 24th May 2006 10:57
Hello again folks.
I've been asked to develop an adult site. I don't have much experience
with these sort of sites, so I am having to do some *ahem* research.
I have some questions. The site won't...
RE: FN-FORUM: MySQL troubles
date posted 24th May 2006 10:57
[EMAIL REMOVED] wrote:
> Right, appealing to all you MySQL lovers:
>
> I have three tables:
>
> - lindoProducts, which stores the ID of the type of
> instrument it is in(instID)
> - lindoInstruments...
FN-FORUM: OT : XP Themes
date posted 24th May 2006 10:52
Looking a new theme for Windows XP, I don't like the XP theme and bored of
looking at a grey interface, can anyone recommend the best place for XP
themes?
Cheers!
Ciaron
Substudio Ltd
07876 20353...
Re: FN-FORUM: Mial Client
date posted 24th May 2006 10:49
On Wed, 24 May 2006, Alain Williams wrote:
> On Wed, May 24, 2006 at 10:26:43AM -0000, [EMAIL REMOVED] wrote:
>>
>> In my opinion, there are only two mail clients worth using:
>>
>> * Thunderbird (f...
RE: FN-FORUM: Mial Client
date posted 24th May 2006 10:41
Pegasus is the biggest pile of shit I have ever used so yes definitely don't
use it.
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of
PuntersPower
Sent: 24 May 2006 11:21...
Re: FN-FORUM: Mial Client
date posted 24th May 2006 10:28
On Wed, May 24, 2006 at 10:26:43AM -0000, [EMAIL REMOVED] wrote:
>
> Quoting PuntersPower [EMAIL REMOVED]
>
> >
> > any recommendations for a decent mail cleint with network capabilities?
> > Not ou...
Re: FN-FORUM: Mial Client
date posted 24th May 2006 10:24
Quoting PuntersPower [EMAIL REMOVED]
>
> any recommendations for a decent mail cleint with network capabilities?
> Not outlook. I looked at pegasus a while back but don't want to use it.
What do yo...
Re: FN-FORUM: MySQL troubles
date posted 24th May 2006 10:20
On Wed, 2006-05-24 at 09:52 +0000, D D Glendinning wrote:
> SELECT c.* FROM lindoProducts c, lindoInstruments p, lindoCategories q
> WHERE p.categoryID=q.ID AND c.instID=p.ID AND c.active='1' AND
> c....
FN-FORUM: Mial Client
date posted 24th May 2006 10:19
any recommendations for a decent mail cleint with network capabilities?
Not outlook. I looked at pegasus a while back but don't want to use it.
--
http://www.punterspower.co.uk...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 10:12
Brilliant
----- Original Message -----
From: "Lists" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Wednesday, May 24, 2006 11:10 AM
Subject: Re: FN-FORUM: php appointment boking
>
> What's a "wheel"...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 10:11
Wimp! Try ADA.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Kathy
http://www.vendetta.co.uk
+44(0)7005 982 261
DNRC Minister for Useful but Irritating Information and...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 10:09
What's a "wheel"?
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Kathy
http://www.vendetta.co.uk
+44(0)7005 982 261
DNRC Minister for Useful but Irritating Information a...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 09:59
He still here?
Has anyone been in touch with admin?
>
> NICE ONE
>
> YOU MUST BE VERY CLEAVER...
FN-FORUM: MySQL troubles
date posted 24th May 2006 09:50
Right, appealing to all you MySQL lovers:
I have three tables:
- lindoProducts, which stores the ID of the type of instrument it is in(ins=
tID)
- lindoInstruments, which in turn stores the ID of th...
RE: FN-FORUM: check this all of you ( this is not a joke )
date posted 24th May 2006 08:08
You checked? Serves you right! Lol ;o)
-----Original Message-----
From: Stanislav Cmakal [EMAIL REMOVED]
Sent: 23 May 2006 22:43
To: FN-FORUM / [EMAIL REMOVED]
Subject: Re: FN-FORUM: check this all...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 08:00
No. I do it in a mix of BASIC and z80 assembler. I can squeeze about
100 items into 48k, but I am developing a 128k version with 3 channel
sound, and a multi-load option.
Ideal-Graphics ( Complet...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 06:10
Ideal-Graphics ( Complete business design solution ) wrote:
> if you are doing e-commerce you must know asp or php
Huh? Are those really the only two languages that you can write
e-commerce applica...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 05:39
> Hi Guys,
>=20
> Looking for an appointment booking system in php with the ability to =
pay for=20
> slots of time? anyone know any paid or free scripts!?!?!!=20
>=20
Have you checked :
http://php....
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 02:56
i actually do between 5 tp 6 a month with my team, seriously.
but did you say you want to learn php.
or do you know php, if you are doing e-commerce you must know asp or php
----- Original Message -...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 02:43
I somehow doubt that coding an ecommerce site is that difficult. Oh -
hang on, I do at least one a month. Can I teach too?
Ideal-Graphics ( Complete business design solution ) wrote:
> you propabl...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 00:29
you propably right.
i didn't say it was doing web design, but he job was to programing any sort
of technlogie in the air force.
but do you want him to help your training.
i have been learning for...
Re: FN-FORUM: Domain Question..
date posted 24th May 2006 00:29
Amarshi Mandalia wrote:
> I can do it for you as a reseller via Totalregistrations for £18 + vat per
> year for .com
Or go to 123-reg.com and do it yourself for £8.99 +vat.
Rob
--
www.madmousem...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 00:26
Clever enough to spell 'clever' correctly, I'm sure.
Regards,
Dan Jeffrey
Freelance Developer
London,
SW2
*E-Mail / MSN:* [EMAIL REMOVED]
*Tel:* +44 (0)7049 795 795
Ideal-Graphics ( Complete...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 00:17
I didn't say that code didn't exist, but the code we're referring to
(PHP) didn't.
The guy couldn't have been doing web development for 36 years,
primarily because there was no 'web' 36 years ago.
A...
RE: FN-FORUM: Domain Question..
date posted 24th May 2006 00:07
I can do it for you as a reseller via Totalregistrations for =A318 + vat =
per
year for .com
Transfer request is sent to your registrar and then to you to release =
the
domain. If the request is auth...
Re: FN-FORUM: php appointment boking
date posted 24th May 2006 00:06
NICE ONE
YOU MUST BE VERY CLEAVER
----- Original Message -----
From: "Darren Foster" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Wednesday, May 24, 2006 12:11 AM
Subject: RE: FN-FORUM: php appointment...
|
|